Winnipesaukee Forum

Winnipesaukee Forum (https://www.winnipesaukee.com/forums/index.php)
-   Home, Cottage or Land Maintenance (https://www.winnipesaukee.com/forums/forumdisplay.php?f=8)
-   -   2x6 white cedar (https://www.winnipesaukee.com/forums/showthread.php?t=28776)

steve-on-mark 05-21-2023 10:00 AM

2x6 white cedar
 
Does anyone know if 2x6 white cedar decking is available anywhere in the area?? Some of our deck boards need to be replaced...thanks.

WinnisquamZ 05-21-2023 10:18 AM

Try “uncle Hilde’s” in Moultonborough. Last month I replaced all my deck boards with 1x5 white cedar from him


Sent from my iPhone using Winnipesaukee Forum mobile app

John Mercier 05-21-2023 10:25 AM

Lowe's didn't have it?
I always thought they carried structural white.

steve-on-mark 05-21-2023 12:24 PM

Neither place carries it.

Sent from my Pixel 6 using Tapatalk

Biggd 05-21-2023 06:19 PM

Quote:

Originally Posted by WinnisquamZ (Post 383620)
Try “uncle Hilde’s” in Moultonborough. Last month I replaced all my deck boards with 1x5 white cedar from him


Sent from my iPhone using Winnipesaukee Forum mobile app

I bought the same stuff for my screened porch!

tummyman 05-21-2023 07:15 PM

I've been looking for 5/4 X6 X12 to replace my dock tops. Stuff at Uncle Hildes is too narrow...only 4 1/2 inches. I see Lowes does have some at about $16 per length. Since I need 50 of them (or 100 if they are 6 ft long), price does matter. Any tips would be appreciated.

tummyman 05-21-2023 08:02 PM

Where is John Mercier when we all need him....???

WinnisquamZ 05-21-2023 10:01 PM

Could you rip a 6x6 cedar post? Not sure how many you need. Also, Center Harbor Docks still use cedar and custom makes pieces. Worth a call


Sent from my iPhone using Winnipesaukee Forum mobile app

GodSmile 05-22-2023 05:58 AM

Goose Bay - Chichester
 
If you are unable to find anything in the immediate area, try Goosebay Lumber in Chichester.

fatlazyless 05-22-2023 06:45 AM

Winnipesaukee Lumber aka Hancock Lumber ...... in Wolfeboro Falls, NH ..... is a mostly Maine lumber business that has a saw mill in Casco Maine .... a good place to ask about white cedar.

coneilremodeling 05-22-2023 07:39 AM

East Coast Lumber in Hampstead stocks 5/4 x 6 white cedar decking.

tis 05-22-2023 07:57 AM

Quote:

Originally Posted by fatlazyless (Post 383633)
Winnipesaukee Lumber aka Hancock Lumber ...... in Wolfeboro Falls, NH ..... is a mostly Maine lumber business that has a saw mill in Casco Maine .... a good place to ask about white cedar.

If they don't stock it, they should be able to order it for you. Winni stopped stocking it but could still order it, not sure what Hancock is doing.

codeman671 05-22-2023 10:08 AM

Quote:

Originally Posted by coneilremodeling (Post 383635)
East Coast Lumber in Hampstead stocks 5/4 x 6 white cedar decking.

It is actually 2x stock, not 5/4. I used to have the same stuff on our log home, its what Riverbend supplies.

Steve- call Bill Finethy at Gilford Home Center. He said he may be able to order it. I just talked to him.

Or just composite the damn thing and stop this annual pain and suffering you put yourselves through!

steve-on-mark 05-22-2023 10:27 AM

Quote:

Originally Posted by codeman671 (Post 383637)
It is actually 2x stock, not 5/4. I used to have the same stuff on our log home, its what Riverbend supplies.

Steve- call Bill Finethy at Gilford Home Center. He said he may be able to order it. I just talked to him.

Or just composite the damn thing and stop this annual pain and suffering you put yourselves through!

you know, K wanted to do composite from the start... I said " why?? We have all this free decking ".....moron!!!

tis 05-22-2023 11:32 AM

Quote:

Originally Posted by steve-on-mark (Post 383639)
you know, K wanted to do composite from the start... I said " why?? We have all this free decking ".....moron!!!

Personally, I don't like the composite either. I would go all Azek or equal if you do change it.

John Mercier 05-22-2023 11:52 AM

Quote:

Originally Posted by tummyman (Post 383627)
Where is John Mercier when we all need him....???

We have 5/4x6 Alaskan Yellow at Meredith.

We don't carry white cedar. The older format was red knotty.

But that is more expensive than what you are finding at Lowes.

12' of the AYC is 32.95
You could ask Mike Mussen what he could do for you...
But I don't think we have purchase much cedar since the price went berserk a couple years back.

John Mercier 05-22-2023 11:58 AM

Azek is more waterproof than composite.
But you may want to check Zuri in comparison...
It is about the same price as the nicer Azek and much more scratch resistant.

In the past, I used the Azek in the gray, and Coastal for the picture framing and trim to spiff it up but keep the price down.

*Azek decking is now TimberTech Advanced PVC.

WJT2 05-22-2023 12:22 PM

Try Bouilia Gorrell Lumber in Laconia.

codeman671 05-22-2023 01:40 PM

We have Azek/Timbertech at our home. It is one of the higher grade ones (english walnut). I find that it scratches very easily. I would go with a different product given the chance.

The product that we have on the island is a brand that I had never heard of (can't remember what it is). We got it from Dave Farley for our dock, then did our deck to match. It is very durable, much more so than Azek. Very happy with it.

steve-on-mark 05-24-2023 06:59 AM

Striking out everywhere I look. I can order it from the original supplier in New Brunswick, but with shipping and tariffs it would be insanely expensive!

Sent from my Pixel 6 using Tapatalk

tis 05-24-2023 07:58 AM

Quote:

Originally Posted by steve-on-mark (Post 383684)
Striking out everywhere I look. I can order it from the original supplier in New Brunswick, but with shipping and tariffs it would be insanely expensive!

Sent from my Pixel 6 using Tapatalk

Steve, did you try Hancock Lumber in Wolfeboro? Winni could always ORDER it. Maybe not any more? 569-1381

tis 05-24-2023 08:05 AM

Quote:

Originally Posted by steve-on-mark (Post 383684)
Striking out everywhere I look. I can order it from the original supplier in New Brunswick, but with shipping and tariffs it would be insanely expensive!

Sent from my Pixel 6 using Tapatalk

I am going to send you a PM.

John Mercier 05-24-2023 10:02 AM

Any of us can order it...
Just a matter of time and cost.

We all order from the same outlets. So it takes the same amount of time... and in general... cost the same amount.

Atlantic Cedar in structural format just isn't something that most carry.
Even getting it in shingle/shake format generally requires a special order.


All times are GMT -4. The time now is 09:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.