Winnipesaukee Forum

Winnipesaukee Forum (https://www.winnipesaukee.com/forums/index.php)
-   Boating (https://www.winnipesaukee.com/forums/forumdisplay.php?f=5)
-   -   Did anyone lose this at The Witches this year? (https://www.winnipesaukee.com/forums/showthread.php?t=30335)

granitehead 11-12-2025 04:18 PM

Did anyone lose this at The Witches this year?
 
1 Attachment(s)
Found early Oct. The props still turn! And you can't have it back :)

VitaBene 11-12-2025 04:27 PM

That is an awesome hall of shame

granitehead 11-12-2025 04:50 PM

It continues in the house...
 
1 Attachment(s)
This is the real Wall of Shame

camp guy 11-12-2025 07:06 PM

Wall of Shame
 
My Wall of Shame is actually the bottom of Johnson's Cove in Winter Harbor. Following the 1938 hurricane there was a sawmill in Johnson's Cove, and when the lumbering was finished, and the sawmill abandoned, the leftover logs slowly (over years) sank to the bottom. The Cove wasn't very deep, so many, many of these logs had their butt ends on the bottom, but their small ends were barely under water. In the early 1950s I had an 8' pram with a 5hp Elgin outboard motor and I used to explore the Cove regularly looking for frogs and turtles. Without exception, every trip to the Cove ended up with more than one busted shear pin. I became an expert at putting in the new one in record time. As a Christmas present one of those years, I received a package of 25 shear pins! The next summer I also was much more careful when I ventured into Johnson's Cove. By now I think the logs don't present a problem.

tis 11-12-2025 07:23 PM

Quote:

Originally Posted by camp guy (Post 404149)
My Wall of Shame is actually the bottom of Johnson's Cove in Winter Harbor. Following the 1938 hurricane there was a sawmill in Johnson's Cove, and when the lumbering was finished, and the sawmill abandoned, the leftover logs slowly (over years) sank to the bottom. The Cove wasn't very deep, so many, many of these logs had their butt ends on the bottom, but their small ends were barely under water. In the early 1950s I had an 8' pram with a 5hp Elgin outboard motor and I used to explore the Cove regularly looking for frogs and turtles. Without exception, every trip to the Cove ended up with more than one busted shear pin. I became an expert at putting in the new one in record time. As a Christmas present one of those years, I received a package of 25 shear pins! The next summer I also was much more careful when I ventured into Johnson's Cove. By now I think the logs don't present a problem.

And I thought my brother was the shear pin champion. It is very shallow by my parent's and he was always shearing a pin. That's a cute story. Those logs might still be just as preserved today as they were in the 50s. The fiber in the wood is enhanced by the water.

TiltonBB 11-12-2025 08:39 PM

About 1970 I bought my first boat, an 18 foot Searay, and was all excited to take it out on Winnipesaukee.

After we launched it I nervously headed out of Alton Bay. My girlfriend said "We don't really know what we are doing, we should go closer to shore". So I did, and hit a rock.

After all these years of boating, I can't say that was the last time I hit something, but over many years the damage incidents have become less frequent.

Biggd 11-12-2025 08:48 PM

I never advertise my stupidity. :emb:

8gv 11-12-2025 09:18 PM

Regarding the outdrive...

How did that fall off?

Did someone forget to install the bolts?

ApS 11-13-2025 04:41 AM

Worth a Bunch
 
Quote:

Originally Posted by VitaBene (Post 404145)
That is an awesome hall of shame

Indeed, it is!

My "Hall of Shame" consisted of (mostly) Danforth anchors, but I've sold them all off.

That counter-rotating Volvo outdrive could fetch over $3000.

:banana:

I'd put it in the "Marketplace" forum here.

:look:

granitehead 11-13-2025 09:24 AM

1 Attachment(s)
Quote:

Originally Posted by 8gv (Post 404155)
Regarding the outdrive...

How did that fall off?

Did someone forget to install the bolts?

I've found many outdrives over the years that contain just the final driveshaft, housing and prop. But this is the first entire lower unit. The lack of damage indeed is surprising; the middle driveshaft isn't bent (and still works! Wish I could hook a motor up to it). But looking at this pic, you can see it was held in place by only four bolts, the rear two of which conveniently sheared away and fell out leaving two nice, secure mounting holes.
Pretty sure this happened this year; almost no corrision at all.

granitehead 11-13-2025 09:45 AM

1 Attachment(s)
Quote:

Originally Posted by VitaBene (Post 404145)
That is an awesome hall of shame

Hall of Shame... I *like* that! Thanks!! Wall and a Hall.:liplick:

ishoot308 11-13-2025 11:20 AM

Awesome!
 
That is AMAZING Granitehead! I love how you have made art out of mishaps!! That's the best "Wall of Shame" I have seen!! :laugh::laugh:

Dan

dippasan 11-13-2025 12:17 PM

Quote:

Originally Posted by granitehead (Post 404168)
Hall of Shame... I *like* that! Thanks!! Wall and a Hall.:liplick:

That's a beautiful Mercruiser Bravo 3 drive. Props alone if in good condition are probably worth $1500

granitehead 11-13-2025 03:40 PM

Quote:

Originally Posted by ishoot308 (Post 404171)
That is AMAZING Granitehead! I love how you have made art out of mishaps!! That's the best "Wall of Shame" I have seen!! :laugh::laugh:

Dan

Thanks, Dan! When designing the house, we specifically put The Wall in behind the Great room's fireplace to hold the best pieces. It quickly overflowed to the porch... not sure where to next. It's an inexhaustible, renewable resource.:laugh:
Quote:

Originally Posted by dippasan (Post 404173)
That's a beautiful Mercruiser Bravo 3 drive. Props alone if in good condition are probably worth $1500

Condition? mmm... not so good.:rolleye1:


All times are GMT -4. The time now is 01:23 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.