Winnipesaukee Forum - View Single Post - Snow blower tune-up?

Sunrise Point · 12-28-2010, 08:59 AM

We have 8" of snow here in Meredith Center and our 20 year old snowblower started on the first pull. However, once it was into the snow and under load, the auger would stop. A quick phone call to Keinan helped to diagnose the problem as a loose / worn belt. Keinan didn't have the part in his shop but called around and found one for us at NAPA in Lakeport. We picked up the part, swapped it for the worn one (Mr. S.P. is pretty handy himself) and we were good to go.

Again, big thanks to Keinan and all local businesses who are there when you need them.

12-28-2010, 08:59 AM	#22
Sunrise Point Senior Member Join Date: Jan 2007 Location: Meredith Center / Winnisquam Posts: 250 Thanks: 87 Thanked 34 Times in 21 Posts	We have 8" of snow here in Meredith Center and our 20 year old snowblower started on the first pull. However, once it was into the snow and under load, the auger would stop. A quick phone call to Keinan helped to diagnose the problem as a loose / worn belt. Keinan didn't have the part in his shop but called around and found one for us at NAPA in Lakeport. We picked up the part, swapped it for the worn one (Mr. S.P. is pretty handy himself) and we were good to go. Again, big thanks to Keinan and all local businesses who are there when you need them.