Before I put in the two 12" do it myself air chambers..I had had an Oatey suppressor on the right (Cold) side ..oriented vertically.
After I replaced the Oatey Suppressor with my own vertical PAIR of air chambers ..On the Bench: I cut the OLD Oatey suppressor apart to see what was inside.
There was a little plastic free ranging piston with two "O" Rings. The Piston was at the TOP of the cylinder.....which indicated to me that the AIR above the piston was gone. The hammer damper was dead. The Oatey suppressor had been oriented Vertical.
I realy like the LG washer and dryer. They are almost silent..compared to the old machines. I Can't hear them running. There is a little "RingTone" that announces when the cycle is done....NB
|