Winnipesaukee Forum - View Single Post

jetskier · 10-15-2014, 08:12 AM

Hi Gusman,

Here is what I do:

Fill the PWC with gas and add marine Stabil
Run the PWC for a short time (minute or two) to allow the stabilized gas mixture to circulate through the system
Remove the battery and place it on a trickle charger for the winter
Thoroughly clean and wax the hull
Put the PWC in storage (storage unit) with the seat and storage compartment open to allow any residual water to evaporate
Put dryer sheets and mouse pellets in the storage area to prevent any winter mouse damage

Some people will additionally "fog" the engine. I have found that it has not really been necessary (IMHO).

10-15-2014, 08:12 AM	#3
jetskier Senior Member Join Date: Apr 2004 Location: North Reading, MA and South Down Shores Posts: 851 Thanks: 57 Thanked 183 Times in 114 Posts	Here is what I do Hi Gusman, Here is what I do: Fill the PWC with gas and add marine Stabil Run the PWC for a short time (minute or two) to allow the stabilized gas mixture to circulate through the system Remove the battery and place it on a trickle charger for the winter Thoroughly clean and wax the hull Put the PWC in storage (storage unit) with the seat and storage compartment open to allow any residual water to evaporate Put dryer sheets and mouse pellets in the storage area to prevent any winter mouse damage Some people will additionally "fog" the engine. I have found that it has not really been necessary (IMHO).