Winnipesaukee Forum - View Single Post

SIKSUKR · 01-25-2006, 09:48 AM

I found that most of the stickers will come off pretty easy.If you cleaned the surface before you put the first one on,it will probably give you a hard time.Do not use a razor unless you don't mind scraching the hell out of your hull.I have had good succes using a heat gun (carefull not to burn your boat!) and a stiff plastic scraper like those used for auto body repair work.You could also substitute a plastic kitchen spatula or the like.To get the leftover glue I used glue remover or some other type of solvent.

01-25-2006, 09:48 AM	#4
SIKSUKR Senior Member Join Date: Apr 2004 Posts: 5,075 Thanks: 215 Thanked 903 Times in 509 Posts	I found that most of the stickers will come off pretty easy.If you cleaned the surface before you put the first one on,it will probably give you a hard time.Do not use a razor unless you don't mind scraching the hell out of your hull.I have had good succes using a heat gun (carefull not to burn your boat!) and a stiff plastic scraper like those used for auto body repair work.You could also substitute a plastic kitchen spatula or the like.To get the leftover glue I used glue remover or some other type of solvent. __________________ SIKSUKR