Quote:
Originally Posted by John Mercier
Should be able to with the meter.
Check for continuity across the wire.
Not sure what meter you are using, but the continuity setting generally looks like sound waves coming from a speaker...
Disconnect the wire if possible, and probe both ends.
Most meters will beep if the wire is good.
|
Ok, so I would connect one lead of the volt meter to the end of the cable that attaches to the battery and the other to the connection before the switch and after to figure out if it's the switch? And I can do that with both the positive and negative leads?
Sent from my SM-S911U using Tapatalk