Kindling Source

CateP · 11-22-2011, 11:54 AM

Hi there. I'm looking for a source for kindling in the Wolfeboro area (or around the lake). I need it for a fireplace this winter. (not a woodstove)

Got some "seasoned" firewood delivered and had to rent a log splitter to get most of it down to fireplace size and it turned out a lot of the wood was pretty wet. The guy who sold it me said it was out in the rain, but I think it was really a lot more green. (moisture drips out of the log ends when it burns and it hisses a lot)

When I lived in Maine I got my kindling from a cabinet maker who saved wood scraps. Any ideas of something similar in the area?

Rag Top Daze · 11-22-2011, 01:35 PM

Hi Cate...Kindling was always a problem around here until TB's brother-in-law turned us on to the fat wood from LL Bean. It works fabulously, and only takes a couple of pieces to get the fire going. We bought the big box 2 years ago and have hardly made a dent in it. Here's the link http://www.llbean.com/llb/shop/38687?feat=osbsr

Happy Thanksgiving...hope to see you again Friday night

CateP · 11-22-2011, 01:39 PM

Quote:

Originally Posted by Rag Top Daze

Hi Cate...Kindling was always a problem around here until TB's brother-in-law turned us on to the fat wood from LL Bean. It works fabulously, and only takes a couple of pieces to get the fire going. We bought the big box 2 years ago and have hardly made a dent in it. Here's the link http://www.llbean.com/llb/shop/38687?feat=osbsr

Happy Thanksgiving...hope to see you again Friday night

Hi Rag Top,
I have fire starter bricks that work great. I just need kindling size wood to help burn this wet wood throughout the fire. I split a bunch with the log splitter, but I know it's not going to be enough based on my first burn last night.

(And yes, I plan to be at open mic night on Friday, guitar in hand.)

upthesaukee · 11-22-2011, 02:02 PM

...and then if you have a hatchet handy, split them into smaller sticks (like about an inch square). Also, check with a few shops (one out by Trites on the right near Carroll country glass) and see if they have some scraps.

Worse case, a walk in the woods and pick up some fallen branches. Just don't go deep in the woods...it's hunting season, dear. Sorry, couldn't help myself

.

And ditto on the fatwood...I found it to be better than starter blocks.

ishoot308 · 11-22-2011, 02:16 PM

In years past any local sawmill would have plenty of scraps hanging around. With wood pellets now the big heating craze all these scraps are being used to produce them.

I think your best bet is to check around your large local stores and industtrial areas and see if they have any unserviceable pallets or old packing crates they want to get rid of.

Good Luck!

Dan

Kamper · 11-22-2011, 03:17 PM

Yep, that's green wood alright... Stack it with lots of gaps and the wind may help dry it a little.

Remember my suggestion about studs and straps? They will do as kindling too. If you can run a splitter than a small electric chain saw or a sawzall should not be much of a challenge.

Good luck!

GTO · 11-22-2011, 03:55 PM

Quote:

Originally Posted by ishoot308

In years past any local sawmill would have plenty of scraps hanging around. With wood pellets now the big heating craze all these scraps are being used to produce them.

I think your best bet is to check around your large local stores and industtrial areas and see if they have any unserviceable pallets or old packing crates they want to get rid of.

Good Luck!

Dan

Pallets are everywhere....you just have to look. I have been cutting up pallets each year for kindling. Doesn't take long with a good saw. We give away tons of pallets every year where I work but thats in Nashua. Check the local grocery stores in your area, they might be trashing theirs or any hardware store.

TOAD · 11-22-2011, 04:03 PM

If you find some home construction sites they will usually let you pick up the scraps free.

Lakepilot · 11-22-2011, 05:01 PM

Cate,

I have some 2x4's and poplar scraps from a couple of projects. It'll do you for awhile. I was going to throw them in the truck and bring them to the dump, but you're welcome to them. If you want them, pm me with your phone number. We're in Wolfeboro.

nada · 11-24-2011, 09:46 AM

Quote:

Originally Posted by Lakepilot

Cate,

I have some 2x4's and poplar scraps from a couple of projects. It'll do you for awhile. I was going to throw them in the truck and bring them to the dump, but you're welcome to them. If you want them, pm me with your phone number. We're in Wolfeboro.

The demo bins at the dump is a great resource for kindling.

11-22-2011, 11:54 AM	#1
CateP Senior Member Join Date: Jan 2011 Location: Wolfeboro Posts: 868 Thanks: 584 Thanked 540 Times in 210 Posts	Kindling Source Hi there. I'm looking for a source for kindling in the Wolfeboro area (or around the lake). I need it for a fireplace this winter. (not a woodstove) Got some "seasoned" firewood delivered and had to rent a log splitter to get most of it down to fireplace size and it turned out a lot of the wood was pretty wet. The guy who sold it me said it was out in the rain, but I think it was really a lot more green. (moisture drips out of the log ends when it burns and it hisses a lot) When I lived in Maine I got my kindling from a cabinet maker who saved wood scraps. Any ideas of something similar in the area?

11-22-2011, 01:35 PM	#2
Rag Top Daze Senior Member Join Date: Apr 2006 Location: Moultonborough Posts: 119 Thanks: 11 Thanked 13 Times in 9 Posts	Fat wood Hi Cate...Kindling was always a problem around here until TB's brother-in-law turned us on to the fat wood from LL Bean. It works fabulously, and only takes a couple of pieces to get the fire going. We bought the big box 2 years ago and have hardly made a dent in it. Here's the link http://www.llbean.com/llb/shop/38687?feat=osbsr Happy Thanksgiving...hope to see you again Friday night __________________ I live for a rag top day

11-22-2011, 02:02 PM	#4
upthesaukee Senior Member Join Date: Jan 2003 Location: Alton Bay Posts: 5,597 Blog Entries: 2 Thanks: 2,455 Thanked 1,979 Times in 1,080 Posts	small bundles of firewood... ...and then if you have a hatchet handy, split them into smaller sticks (like about an inch square). Also, check with a few shops (one out by Trites on the right near Carroll country glass) and see if they have some scraps. Worse case, a walk in the woods and pick up some fallen branches. Just don't go deep in the woods...it's hunting season, dear. Sorry, couldn't help myself . And ditto on the fatwood...I found it to be better than starter blocks. __________________ I Live Here... I am always UPTHESAUKEE !!!!

11-22-2011, 04:03 PM	#8
TOAD Senior Member Join Date: Jun 2009 Location: Soon to be Moultonboro Posts: 258 Thanks: 1 Thanked 81 Times in 34 Posts	If you find some home construction sites they will usually let you pick up the scraps free. __________________ "Government is not reason, it is not eloquence, it is force; like fire, a troublesome servant and a fearful master. Never for a moment should it be left to irresponsible action.....Unknown....but attributed to George Washington

11-22-2011, 02:16 PM	#5
ishoot308 Senior Member Join Date: Feb 2008 Location: Gilford, NH / Welch Island Posts: 6,239 Thanks: 2,385 Thanked 5,280 Times in 2,053 Posts	In years past any local sawmill would have plenty of scraps hanging around. With wood pellets now the big heating craze all these scraps are being used to produce them. I think your best bet is to check around your large local stores and industtrial areas and see if they have any unserviceable pallets or old packing crates they want to get rid of. Good Luck! Dan

11-22-2011, 03:17 PM	#6
Kamper Senior Member Join Date: Jul 2005 Location: Thornton's Ferry Posts: 1,306 Thanks: 67 Thanked 171 Times in 127 Posts	Yep, that's green wood alright... Stack it with lots of gaps and the wind may help dry it a little. Remember my suggestion about studs and straps? They will do as kindling too. If you can run a splitter than a small electric chain saw or a sawzall should not be much of a challenge. Good luck!

11-22-2011, 05:01 PM	#9
Lakepilot Senior Member Join Date: Aug 2007 Posts: 446 Thanks: 70 Thanked 57 Times in 40 Posts	Cate, I have some 2x4's and poplar scraps from a couple of projects. It'll do you for awhile. I was going to throw them in the truck and bring them to the dump, but you're welcome to them. If you want them, pm me with your phone number. We're in Wolfeboro.

The Following User Says Thank You to Lakepilot For This Useful Post:
CateP (11-25-2011)

The Following User Says Thank You to nada For This Useful Post:
CateP (11-25-2011)