![]() |
![]() |
|
Home | Forums | Gallery | Webcams | Blogs | YouTube Channel | Classifieds | Calendar | Register | FAQ | Donate | Members List | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Apr 2006
Location: Central MA-Gilford
Posts: 1,446
Thanks: 340
Thanked 119 Times in 96 Posts
|
![]()
Looking to purchase a battery backup to run my pellet stove (Harmon P61).
Second question, are battery backup devices specific to stove manufacturer ? Thanks for your feedback, much appreciated ! |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Mar 2008
Location: Welch Island and The Taylor Community
Posts: 3,299
Thanks: 1,222
Thanked 2,082 Times in 954 Posts
|
![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jun 2021
Posts: 3,369
Thanks: 3
Thanked 594 Times in 490 Posts
|
![]()
Slickcraft beat me to it.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Apr 2004
Location: Eastern MA & Frye Island/Sebago Lake, Maine
Posts: 951
Thanks: 252
Thanked 351 Times in 158 Posts
|
![]()
I’ve had two different Harman stoves since 1997. They are the best, most reliable stoves money can buy. Having said that, their electronics are very sensitive. If you plan to do this make sure that you use the Tripp Lite back up that delivers pure sine wave power to the stove. Also know that you’ll need the space for a deep cycle battery next to the stove. Not very aesthetically pleasing to the eye especially if your stove is in your living space….
__________________
" Live for today because yesterday is gone and tomorrow may never come" |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Apr 2006
Location: Central MA-Gilford
Posts: 1,446
Thanks: 340
Thanked 119 Times in 96 Posts
|
![]()
Thank you everyone for your feedback !
|
![]() |
![]() |
Sponsored Links |
|
![]() |
#6 |
Senior Member
Join Date: Aug 2007
Location: South Down Shores
Posts: 1,944
Thanks: 544
Thanked 570 Times in 335 Posts
|
![]()
FWIW, we ran our Harman stove off of a couple of different "cheap" inverters, I doubt they had a clean sine wave, and had no problems.
As I recall, the power draw was fairly high when the stove with lighting, but not in operation. Depending on what you are trying to do, you might be able to get by with a smaller UPS, assuming that you don't need to have the stove light the pellets (you can always do the manual ignition in a pinch). Keep in mind that most UPS batteries won't last more than a few years. If you are going to rely on the UPS, I would suggest doing a manual test of it every few months to give the batteries some discharge cycles, and also to ensure that they are still good enough to handle a large discharge current without running down unexpectedly. I've seen too many cases where someone puts a UPS in, and it gets little use for a couple of years and then in the first major outage it runs down in 15 minutes.
__________________
[insert witty phrase here] |
![]() |
![]() |
![]() |
Bookmarks |
|
|