Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Boating
Home Forums Gallery Webcams Blogs YouTube Channel Classifieds Register FAQ Members List Donate Today's Posts

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-17-2012, 05:22 PM   #9
Misty Blue
Senior Member
 
Join Date: Jul 2004
Posts: 658
Thanks: 121
Thanked 283 Times in 98 Posts
Default Use a kedge.

A way to deal with this is to use a kedgeing anchor.

A kedge is an anchor (either a regular anchor or a mooring block) attached to the outboard side of the boat.

Our set up... About 15 feet outboard of our boats we plant a mooring block. Attached to the block is about 6 feet of heavy chain. Attached to the chain is enough nylon (1/2 inch is good) line to reach a conveniant place on your dock.

You tie up the boat to the dock in the regular way only a bit looser. You then take the kedging line and secure it to your outboard, midships cleat. With the loose dock lines the kedging line will pull the boat away from the dock. Adjust your docking lines so that the boat is about a foot from the rubbing posts. The weight of the chain running along the bottom will lift and drop as the boat moves up and down and will act as a shock absorber. It is cheap and easy on the boat and no permit required.

Good luck!

Misty Blue.
Misty Blue is offline   Reply With Quote
The Following 4 Users Say Thank You to Misty Blue For This Useful Post:
CTYankee (05-17-2012), diprna (05-20-2012), Jonas Pilot (05-17-2012), Winnisquamguy (05-18-2012)
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 04:58 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

This page was generated in 0.15934 seconds