high performance diesel shop

[Silverdale]

We like Greg Ward's Truck and Equipment Repair in Alton, N.H.
603-387-2853. Many years experience and reasonable rates.

[jims]

my 2004 f-350 ran great the first year , then all the problems surfaced , the brake system just fell apart (poor steel quality ) ,oil pan rotted out , fuel water seperator rotted out ,transmission lines rotted out ,new egr valve ,frame and subframe rot ,constant check engine light ,turbo problems ,i cant afford a new truck so im stuck fixing this one,

[Belmont Resident]

How are your headlights? Mine are beyond pitiful and I’m looking for alternatives.
I went to the link you sent and saw a conversion to the Harley Davidson lights for the 04 Super Duty. I run 2 100watt aircraft lights that help a lot when driving in North Country.

I’ve replaced my front brakes twice and rears once in 115K. I’m running Raybestos parts and they seem to work great. The first time around I ran NAPA premium and they didn’t hold up well. Neither did the NAPA batteries. They only lasted 1 year. Now I’ve got Sears Platinum and they are excellent, but for $200 a pop they better be.

[SAMIAM]

Same with me, Jims...I thought I was safe with the optional factory warranty on my my 2005 Dodge 2500 .....but they just said "tough luck" the warranty doesn't cover corrosion. Oil pan, tranny lines, ps lines, pumps etc...cost over 5k.
Stay away from Dodge trucks.

[Belmont Resident]

I mentioned to a friend that I was looking into how Dodge trucks have come in the last few years.
He said, you buy a Dodge and I will no longer be your friend. Of course he was joking, but serious also. With all the bad publicity and quality issues, Dodge has a long way to go before they are taken seriously.
I do know some who have had good luck with them and still buy them, but not one of them uses their truck for more than transportation.
They all have their issues but I thought the whole rotting out thing was in the past.
Why does Ford line the wheel wells with foam? Why design the cab corners to be open areas where dirt can gather and promote rot?

The 04 Xterra that I drive around because it wasn’t worth anything to trade in has 115K on it. No rot, little rust and it just keeps going and going.
My wife loves her Hyundai Santa Fe. Great price, great fuel economy comfortable ride, and they are not American made, so it probably will not rot out. What more could you ask for?

[SIKSUKR]

Geez, the guy just asked for a good diesel shop. I'll second Diesel Don in weare. I need to go lay on the couch now and speak with my therapist.

[Wolfeboro_Baja]

Originally Posted by Belmont Resident

Why does Ford line the wheel wells with foam? Why design the cab corners to be open areas where dirt can gather and promote rot?

Two words.......planned obsolescence (OR poor engineering!)!!

I know because I have a 2001 F250 that I bought new that currently has rotting crossmembers on the pickup bed, plus the cab corners and door bottoms (all 4) need repair. I won't even get into the mechanical issues I've had with this truck. It's ridiculous some of the stuff I've had to repair or replace on this truck and it's only got 66,400 miles on it!

[jst_4_kiks]

If you are still in need of a good local diesel shop contact Shawn or Wes at No Limits Motorsports. Located on rte 107 by the Laconia Ice Arena 6035278119 www.nolimitsnh.com

[Belmont Resident]

I’d be leery of them. Wes used to work at Belknap tire. His customer service skills were terrible. Very poor attitude and did not like to be questioned about how much things cost, and would reluctantly give you a breakdown of service provided.
I took 3 vehicles worth of tires, inspections and repairs and went elsewhere.
I’ve never had dealings with the other Shawn.

[nhhick]

Originally Posted by Belmont Resident

I mentioned to a friend that I was looking into how Dodge trucks have come in the last few years.
He said, you buy a Dodge and I will no longer be your friend. Of course he was joking, but serious also. With all the bad publicity and quality issues, Dodge has a long way to go before they are taken seriously.
I do know some who have had good luck with them and still buy them, but not one of them uses their truck for more than transportation.
They all have their issues but I thought the whole rotting out thing was in the past.
Why does Ford line the wheel wells with foam? Why design the cab corners to be open areas where dirt can gather and promote rot?

The 04 Xterra that I drive around because it wasn’t worth anything to trade in has 115K on it. No rot, little rust and it just keeps going and going.
My wife loves her Hyundai Santa Fe. Great price, great fuel economy comfortable ride, and they are not American made, so it probably will not rot out. What more could you ask for?

Between my dad and I we have had 4 Dodge trucks since 2001. The 2 that have been traded in have had well over 100K on them and no issues except for normal wear (brakes, CV joints, etc), and the were not just for commuting but for towing, farming, and forestry work. My Dad tought me to take care of my truck and it will take care of you and it has prooven true since I started driving.

As far as the Ford issues check the diesel forums as there are a lot of good advice on them from people whoe have had the same issues. As someone who went to school for deisel technology (agricultural) its no surpise there's are a lot of issues with the new engines, across the board. emissions standards change fast and by large steps and do not leave enough time to properly test everything. Wish we could go back to the bullet proof 5.9 Cummins and 7.3 Powerstokes.

[Belmont Resident]

Originally Posted by nhhick

Between my dad and I we have had 4 Dodge trucks since 2001. The 2 that have been traded in have had well over 100K on them and no issues except for normal wear (brakes, CV joints, etc), and the were not just for commuting but for towing, farming, and forestry work. My Dad tought me to take care of my truck and it will take care of you and it has prooven true since I started driving.

As far as the Ford issues check the diesel forums as there are a lot of good advice on them from people whoe have had the same issues. As someone who went to school for deisel technology (agricultural) its no surpise there's are a lot of issues with the new engines, across the board. emissions standards change fast and by large steps and do not leave enough time to properly test everything. Wish we could go back to the bullet proof 5.9 Cummins and 7.3 Powerstokes.

I’ve always spared no expense in taking care of every vehicle I’ve owned. Regular oil changes with Amsoil, filters changed grease, etc. It’s the things I have no control over that fail. Things that for a diesel truck should be built to compliment the engines life expectancy are what are killing me.
FYI I know a die hard Ford owner that stopped in to test drive a Tundra and bought one.
I asked why he said the ride and fit & finish sold him on it. His truck was only a 150 but fairly new.

[robmac]

Alot can be said about Toyota p/u trucks but riddle me this. Why is it everyday the Toyota dealers get delivery of p/u truck frames?

[gtxrider]

There was a trouble with frames rusting through on the small Toyoyta pickups

[robmac]

these are full size frames they get m-f every week,I laugh as I watch them unload every day

[Winnisquamguy]

Originally Posted by robmac

these are full size frames they get m-f every week,I laugh as I watch them unload every day

If I remember correctly didn't Toyota buy back all the trucks with rust and gave them double what the NADA was on them?

[Belmont Resident]

This is another reason why I like these guys. They diagnosed my diesel truck problems and before ordering the new parts they installed known good used parts and tested to see if all the codes cleared.
That is going the extra mile, something you do not see often with auto repair shops

Rob Toyota had a problem with frames on the 2005 line of Tundra’s.
Me I would not buy a Toyota Tundra because the fuel economy is terrible.
Also I personally think it is a rather boring looking truck with no lines at all.