Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Boating
Home Forums Gallery Webcams Blogs YouTube Channel Classifieds Register FAQ Members List Donate Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 08-12-2014, 03:26 PM   #1
Woodsy
Senior Member
 
Join Date: May 2004
Location: Weirs Beach
Posts: 1,977
Thanks: 80
Thanked 985 Times in 444 Posts
Default NO Wake does not mean no wake!

I really don't get why people do not understand this very simple, very clear rule.

270-D:1 Definitions

VI. "Headway speed'' means 6 miles per hour or the slowest speed that a boat can be operated and maintain steerage way.

VIII. "No wake area'' means an area where a boat is to be operated only at headway speed.

The legal interpretation is VERY clear.

You are allowed up to 6 MPH... regardless of the wake generated. The only reason you can exceed 6 MPH is to maintain steerage and control. It is physically IMPOSSIBLE for a moving boat to leave NO WAKE.

Some people think no wake means DEAD SLOW.... It does not nor was it ever intended to. If that was the case NOBODY would get out of Paugus Bay on Labor Day weekend.

I got pulled over once for NWZ violation.... I asked the officer what the issue was, he told me too fast in a NWZ... I indicated my GPS said otherwise. I was travelling at 5 MPH. I offered to demonstrate, he politely declined, and sent me on my way.

If you need more than 6 MPH that you better have a good reason why... water currents, boat hull design etc etc... the 6 MPH was not a randomly chosen number.

The NWZ should be relabeled to HEADWAY SPEED ONLY thus eliminating any confusion.

Also note that the term "headway speed" is also used in several other RSA's

Woodsy
__________________
The only way to eliminate ignorant behavior is through education. You can't fix stupid.
Woodsy is offline   Reply With Quote
The Following 6 Users Say Thank You to Woodsy For This Useful Post:
Aldidonato (08-14-2014), Gatto Nero (08-13-2014), gillygirl (08-12-2014), HellRaZoR004 (08-12-2014), Orion (08-13-2014), whalebackpoint'r (08-13-2014)
Old 08-12-2014, 09:55 PM   #2
Dave R
Senior Member
 
Dave R's Avatar
 
Join Date: Jul 2004
Posts: 2,985
Thanks: 246
Thanked 744 Times in 444 Posts
Default

Quote:
Originally Posted by Woodsy View Post
I really don't get why people do not understand this very simple, very clear rule.

270-D:1 Definitions

VI. "Headway speed'' means 6 miles per hour or the slowest speed that a boat can be operated and maintain steerage way.

VIII. "No wake area'' means an area where a boat is to be operated only at headway speed.

The legal interpretation is VERY clear.

You are allowed up to 6 MPH... regardless of the wake generated. The only reason you can exceed 6 MPH is to maintain steerage and control. It is physically IMPOSSIBLE for a moving boat to leave NO WAKE.

Some people think no wake means DEAD SLOW.... It does not nor was it ever intended to. If that was the case NOBODY would get out of Paugus Bay on Labor Day weekend.

I got pulled over once for NWZ violation.... I asked the officer what the issue was, he told me too fast in a NWZ... I indicated my GPS said otherwise. I was travelling at 5 MPH. I offered to demonstrate, he politely declined, and sent me on my way.

If you need more than 6 MPH that you better have a good reason why... water currents, boat hull design etc etc... the 6 MPH was not a randomly chosen number.

The NWZ should be relabeled to HEADWAY SPEED ONLY thus eliminating any confusion.

Also note that the term "headway speed" is also used in several other RSA's

Woodsy
I have to confess that I used to think it meant the slowest possible speed to maintain steerage with an absolute max of 6 MPH...
Dave R is offline   Reply With Quote
Old 08-13-2014, 07:33 AM   #3
tis
Senior Member
 
tis's Avatar
 
Join Date: Jan 2006
Posts: 7,041
Thanks: 803
Thanked 1,525 Times in 1,056 Posts
Default

Obviously there is a big problem with this law. The way it is written it does sound like you can make a wake as long as you are doing the 6mph. However, MP is not usually going to agree with you. A wake is a wake.
tis is offline   Reply With Quote
The Following User Says Thank You to tis For This Useful Post:
upthesaukee (08-13-2014)
Old 08-13-2014, 08:43 AM   #4
Dave R
Senior Member
 
Dave R's Avatar
 
Join Date: Jul 2004
Posts: 2,985
Thanks: 246
Thanked 744 Times in 444 Posts
Default

Quote:
Originally Posted by tis View Post
Obviously there is a big problem with this law. The way it is written it does sound like you can make a wake as long as you are doing the 6mph. However, MP is not usually going to agree with you. A wake is a wake.
I don't think there's a problem with the law at all. The problem is that people, (including MP, apparently) seem to think that words on some little floating signs are to be taken literally and that they should ignore the actual law. I've seen signs in NH that say "idle speed only", but they are merely suggestions.

People that don't plan and prepare for the effects of wakes just because they have waterfront property or a slip in a no wake zone are being unrealistic and negligent. There's always a chance of a waves on water. Realistically, one could justifiably make a huge wake in a no wake zone if a human life was at stake.

With the 45/30 speed limit in place, and speed detection equipment on board MP boats, this seems like a VERY easy law for MP to enforce with quantifiable evidence.
Dave R is offline   Reply With Quote
Old 08-13-2014, 09:52 AM   #5
depasseg
Senior Member
 
Join Date: Jul 2011
Posts: 129
Thanks: 16
Thanked 33 Times in 28 Posts
Default

Quote:
Originally Posted by tis View Post
Obviously there is a big problem with this law. The way it is written it does sound like you can make a wake as long as you are doing the 6mph. However, MP is not usually going to agree with you. A wake is a wake.
And the law (which is very poorly worded and misleading) mentions nothing about wake, waves, ripples, or anything of that sort. It only mentions speed.
depasseg is offline   Reply With Quote
Sponsored Links
Old 08-13-2014, 10:25 AM   #6
Woodsy
Senior Member
 
Join Date: May 2004
Location: Weirs Beach
Posts: 1,977
Thanks: 80
Thanked 985 Times in 444 Posts
Default

Quote:
Originally Posted by depasseg View Post
And the law (which is very poorly worded and misleading) mentions nothing about wake, waves, ripples, or anything of that sort. It only mentions speed.
The law is not poorly written.. it is written to be easily enforceable. People unfortunately take the term "No Wake Zone" literally... when the term "No Wake Zone" is actually defined in the RSA as a "Headway Speed Zone"

Speed is the only thing that can be easily measured (radar, laser, etc) and is routinely accepted in a court of law...

Wake height is not easily measured and very much up for debate...

Woodsy
__________________
The only way to eliminate ignorant behavior is through education. You can't fix stupid.
Woodsy is offline   Reply With Quote
Old 08-13-2014, 10:41 AM   #7
SIKSUKR
Senior Member
 
SIKSUKR's Avatar
 
Join Date: Apr 2004
Posts: 5,075
Thanks: 215
Thanked 903 Times in 509 Posts
Default

Against the current is not an issue with maintaining steerage. Going with the current is when you may sometimes need to go close to 10 mph(relative to the land) to maintain steerage in a 5 mph current.
__________________
SIKSUKR
SIKSUKR is offline   Reply With Quote
Old 08-13-2014, 01:26 PM   #8
depasseg
Senior Member
 
Join Date: Jul 2011
Posts: 129
Thanks: 16
Thanked 33 Times in 28 Posts
Default

Quote:
Originally Posted by Woodsy View Post
The law is not poorly written.. it is written to be easily enforceable. People unfortunately take the term "No Wake Zone" literally... when the term "No Wake Zone" is actually defined in the RSA as a "Headway Speed Zone"

Speed is the only thing that can be easily measured (radar, laser, etc) and is routinely accepted in a court of law...

Wake height is not easily measured and very much up for debate...

Woodsy
Perhaps I wasn't clear. The law is clearly about speed, not wake, which I'm fine with. The poorly written part is how it's written as an "OR" without any sort of clarification and a bit of ambiguity.

As it is written, I see two interpretations:

- One is if you put an "either" before the 6mph
- The other is if you apply the "slowest" to the entire statement (i.e. the slower of either 6mph or maintain steerage")

Applying Boolean logic to the statement, the OR statement means only one of the 2 things must be true. Either 6MPH OR slowest possible to maintain steerage. You only need to do one of these. However, it seems there is enough confusion over the intent of the "slower" phrase, that it has become part of the equation. And in either case, it doesn't clarify if it is speed through water, or speed over ground.

To me, it would be much clearer if it were worded as either:

A) "Headway speed'' means no faster than 6 miles per hour (Speed over Ground i.e. GPS measured) unless the vessel is unable to maintain steerage, in which case the vessel must operate at the slowest possible speed to maintain steerage way. (this means you can go up to 6mph, and only go over in order to maintain steerage.)

or

B) "Headway speed'' means operating at the slowest possible speed to maintain steerage way. (this means go as slow as possible to maintain steerage).


Actual 270-D:1 Definitions

VI. "Headway speed'' means 6 miles per hour or the slowest speed that a boat can be operated and maintain steerage way.
depasseg is offline   Reply With Quote
Old 08-13-2014, 03:10 PM   #9
Woodsy
Senior Member
 
Join Date: May 2004
Location: Weirs Beach
Posts: 1,977
Thanks: 80
Thanked 985 Times in 444 Posts
Default

depasseg,

The law is actually very clearly written to allow variation and still have a set enforceable parameter. The set parameter is 6 MPH, you are not to exceed that unless deemed necessary (by you the captain) to maintain steerage. That's the variation. The burden of proof is on the MP below 6 MPH, the Burden of proof above 6 MPH is on you, the captain, to justify why you had to exceed 6 MPH.

There is no need for Boolean logic. There are plenty of precedents in the courts.

The NH Legislature recognized that different boats require different speeds to maintain steerage. They also recognized that requiring all boats to travel at the slowest possible speed of another craft was an undue burden. 6 MPH was the decided upon headway speed recommendation. This takes into account boat type, safety, boat traffic, currents, weather condition etc. Thus, you can actually get out of Paugus bay on a holiday weekend... Or up the Piscataqua River with an outgoing tide.

The Weirs Channel is approx 3/4 of a mile long... not counting boats stacking up. At 3 MPH its a 15 minute transit time... at 6 MPH its a 7.5 minute transit time.

Woodsy
__________________
The only way to eliminate ignorant behavior is through education. You can't fix stupid.
Woodsy is offline   Reply With Quote
Old 08-13-2014, 05:55 PM   #10
Orion
Senior Member
 
Orion's Avatar
 
Join Date: Feb 2003
Location: MA
Posts: 914
Thanks: 598
Thanked 193 Times in 91 Posts
Default Only one interpretation makes sense

I agree the law is poorly written.....but also agree with Woodsy. It makes no sense to make the slowest possible speed to maintain steerage the limit. I can reduce my speed to near zero and maintain steerage (such as when docking), so how could that possibly be the intent? Clearly the intent is 6 MPH speed limit and the MP needs to be re-educated.
Orion is offline   Reply With Quote
Old 08-13-2014, 07:07 PM   #11
tis
Senior Member
 
tis's Avatar
 
Join Date: Jan 2006
Posts: 7,041
Thanks: 803
Thanked 1,525 Times in 1,056 Posts
Default

If the law was meant to be headway speed why don't they use headway speed signs like they used to.

Sorry, I don't think headway speed and no wake are the same thing and I don't think when you see a No Wake sign that the intention is to allow one to go headway speed no matter how much wake you are making. If the law was properly written we obviously would not have differing opinions on this.
tis is offline   Reply With Quote
Old 08-13-2014, 08:00 PM   #12
depasseg
Senior Member
 
Join Date: Jul 2011
Posts: 129
Thanks: 16
Thanked 33 Times in 28 Posts
Default

Quote:
Originally Posted by tis View Post
If the law was meant to be headway speed why don't they use headway speed signs like they used to.

Sorry, I don't think headway speed and no wake are the same thing and I don't think when you see a No Wake sign that the intention is to allow one to go headway speed no matter how much wake you are making. If the law was properly written we obviously would not have differing opinions on this.
Actually, No Wake Area and Headway speed are exactly the same according to the law. That part is clear. Headway speed markers instead of NWZ would be very helpful.

Perhaps it's a training issue with the Marine Patrol. There have been too many stories of people being stopped for making a wake.
depasseg is offline   Reply With Quote
Old 08-13-2014, 08:17 AM   #13
rsmlp
Senior Member
 
Join Date: May 2005
Posts: 516
Thanks: 5
Thanked 179 Times in 92 Posts
Default

Quote:
Originally Posted by Woodsy View Post
I really don't get why people do not understand this very simple, very clear rule.

270-D:1 Definitions

VI. "Headway speed'' means 6 miles per hour or the slowest speed that a boat can be operated and maintain steerage way.

VIII. "No wake area'' means an area where a boat is to be operated only at headway speed.

The legal interpretation is VERY clear.

You are allowed up to 6 MPH... regardless of the wake generated. The only reason you can exceed 6 MPH is to maintain steerage and control. It is physically IMPOSSIBLE for a moving boat to leave NO WAKE.

Some people think no wake means DEAD SLOW.... It does not nor was it ever intended to. If that was the case NOBODY would get out of Paugus Bay on Labor Day weekend.

I got pulled over once for NWZ violation.... I asked the officer what the issue was, he told me too fast in a NWZ... I indicated my GPS said otherwise. I was travelling at 5 MPH. I offered to demonstrate, he politely declined, and sent me on my way.

If you need more than 6 MPH that you better have a good reason why... water currents, boat hull design etc etc... the 6 MPH was not a randomly chosen number.

The NWZ should be relabeled to HEADWAY SPEED ONLY thus eliminating any confusion.

Also note that the term "headway speed" is also used in several other RSA's

Woodsy
Well said! few understand this obvious and correct interpretation-even MP!
rsmlp is offline   Reply With Quote
Old 08-13-2014, 08:39 AM   #14
Woodsy
Senior Member
 
Join Date: May 2004
Location: Weirs Beach
Posts: 1,977
Thanks: 80
Thanked 985 Times in 444 Posts
Default

Tis,

It is physically IMPOSSIBLE for a boat moving forward NOT to leave a wake. A boat moving forward displaces water.. the water fills the void caused by the hull, creating a wake. Unless a boat is adrift and floating freely with the current, it is creating a wake. The height of the wake will vary with the type of hull, and the speed at which the hull goes thru the water.

Because of the myriad of boat hull designs, there is no way to define what is acceptable wake height, and what is not. Every hull is different and creates a different wake and that wake all varies with the forward speed of the boat.

The important clause here is "maintain steerage". Maintaining proper control of your boat is paramount and trumps ALL! Currents, boat traffic, wind & weather can all affect at what speed steerage can be maintained. For example, in the spring the Weirs Channel usually has a 5+ MPH current... to overcome that current you have to go a minimum of 7-11 MPH... guess what?? Your boat is making a pretty good wake!

The 6 MPH speed is essentially the standard acceptable speed that is universally recognized as the maximum speed necessary to maintain steerage for 98% of the recreational boats. Why 6 MPH and not 5 MPH? No idea!

Woodsy
__________________
The only way to eliminate ignorant behavior is through education. You can't fix stupid.
Woodsy is offline   Reply With Quote
Old 08-13-2014, 08:58 AM   #15
ITD
Senior Member
 
ITD's Avatar
 
Join Date: Apr 2004
Location: Moultonboro, NH
Posts: 2,963
Thanks: 490
Thanked 705 Times in 395 Posts
Default

Quote:
Originally Posted by Woodsy View Post
Tis,

It is physically IMPOSSIBLE for a boat moving forward NOT to leave a wake. A boat moving forward displaces water.. the water fills the void caused by the hull, creating a wake. Unless a boat is adrift and floating freely with the current, it is creating a wake. The height of the wake will vary with the type of hull, and the speed at which the hull goes thru the water.

Because of the myriad of boat hull designs, there is no way to define what is acceptable wake height, and what is not. Every hull is different and creates a different wake and that wake all varies with the forward speed of the boat.

The important clause here is "maintain steerage". Maintaining proper control of your boat is paramount and trumps ALL! Currents, boat traffic, wind & weather can all affect at what speed steerage can be maintained. For example, in the spring the Weirs Channel usually has a 5+ MPH current... to overcome that current you have to go a minimum of 7-11 MPH... guess what?? Your boat is making a pretty good wake!

The 6 MPH speed is essentially the standard acceptable speed that is universally recognized as the maximum speed necessary to maintain steerage for 98% of the recreational boats. Why 6 MPH and not 5 MPH? No idea!

Woodsy
You don't have to go faster to maintain steerage in a current. You become part of the mass of water when you travel in a current. If your headway speed is 5 mph in still water then it will be 5 mph in a current relative to the water. Your speed relative to the point on land will be different in a current than in still water, but this does not affect your steerage and your wake is the same unless you speed up, which is unnecessary to maintain steerage. It's simple physics.
ITD is offline   Reply With Quote
Old 08-13-2014, 09:07 AM   #16
cillovely
Senior Member
 
cillovely's Avatar
 
Join Date: Jun 2010
Location: Boston, MA
Posts: 106
Thanks: 17
Thanked 26 Times in 15 Posts
Default

I stayed in Center Harbor for the first time this past summer. I was very surprised there isn't any sort of no-wake zone as you get closer to the docks they way they have it in Meredith Bay and Alton Bay. All sorts of craft come barrel a$$-ing thru there full bore. I didn't really care other than the times when I'd be trying to dock my boat and the waves would be crashing making things tricky. I just thought it was odd.

I know on the Charles River there were many a kayaker and row-boater that would do the slow down wave in certain zones, but as it's been stated 6mph is no-wake, anything less it does get harder to maintain control and if I do make a little wave there isn't much I can do.
cillovely is offline   Reply With Quote
Old 08-13-2014, 09:14 AM   #17
Seaplane Pilot
Senior Member
 
Join Date: Apr 2004
Posts: 1,177
Thanks: 663
Thanked 943 Times in 368 Posts
Default

Quote:
Originally Posted by cillovely View Post
I stayed in Center Harbor for the first time this past summer. I was very surprised there isn't any sort of no-wake zone as you get closer to the docks they way they have it in Meredith Bay and Alton Bay. All sorts of craft come barrel a$$-ing thru there full bore. I didn't really care other than the times when I'd be trying to dock my boat and the waves would be crashing making things tricky. I just thought it was odd.

I know on the Charles River there were many a kayaker and row-boater that would do the slow down wave in certain zones, but as it's been stated 6mph is no-wake, anything less it does get harder to maintain control and if I do make a little wave there isn't much I can do.
That's because Rusty McLear and Alex Ray don't have waterfront hotels and restaurants in Center Harbor as they do in Meredith. Does anyone really think that the HUGE no-wake zone in Meredith is there just because the State thought it was a good idea? If so, then I have some swamp land in Florida that I would love to sell to you.
Seaplane Pilot is offline   Reply With Quote
The Following 2 Users Say Thank You to Seaplane Pilot For This Useful Post:
Greene's Basin Girl (08-13-2014), mfitz (08-13-2014)
Old 08-13-2014, 09:32 AM   #18
TiltonBB
Senior Member
 
Join Date: Feb 2005
Location: Gilford, NH and Florida
Posts: 3,234
Thanks: 779
Thanked 2,310 Times in 1,004 Posts
Default Maybe

Quote:
Originally Posted by Woodsy View Post
Tis,

It is physically IMPOSSIBLE for a boat moving forward NOT to leave a wake. A boat moving forward displaces water.. the water fills the void caused by the hull, creating a wake. Unless a boat is adrift and floating freely with the current, it is creating a wake. The height of the wake will vary with the type of hull, and the speed at which the hull goes thru the water.

Because of the myriad of boat hull designs, there is no way to define what is acceptable wake height, and what is not. Every hull is different and creates a different wake and that wake all varies with the forward speed of the boat.

The important clause here is "maintain steerage". Maintaining proper control of your boat is paramount and trumps ALL! Currents, boat traffic, wind & weather can all affect at what speed steerage can be maintained. For example, in the spring the Weirs Channel usually has a 5 MPH current... to overcome that current you have to go a minimum of 7-11 MPH... guess what your boat is making a pretty good wake!

The 6 MPH speed is essentially the standard acceptable speed that is universally recognized as the maximum speed necessary to maintain steerage for 98% of the recreational boats. Why 6 MPH and not 5 MPH? No idea!

Woodsy
A couple of points that I would disagree with:

The movement of water across your hull is what leaves a wake, not necessarily your boat speed. For example: If you maintain a constant stationary position against the current in the Weirs Channel in the spring your boat will be leaving a wake, though not moving at all.

To travel against the current in the Weirs Channel (or anywhere with a strong current) the same 5 to 7 mile per hour speed is all that is needed. Don't confuse the speed of the water across your hull with your actual speed over the stationary land. Your boat speedometer (if not GPS) will indicate a higher speed than you are actually going because it will read off the pressure sensor and will not correct for water flow.

Many people are use to one "No Wake" speed RPM setting and fail to account for the movement of water underneath them and adjust accordingly. Quite often that is the reason that the Weirs Channel backs up so much. It would be nice if people looked behind them to see if their slow speed is causing a backup or handling problem for the boats following them. Not all boats react the same way at slow speeds.
TiltonBB is online now   Reply With Quote
Old 08-13-2014, 09:52 AM   #19
Woodsy
Senior Member
 
Join Date: May 2004
Location: Weirs Beach
Posts: 1,977
Thanks: 80
Thanked 985 Times in 444 Posts
Default

TiltonBB & ITD...

Agreed! Its the old Air Speed vs Ground speed. LOL!

I was just trying to keep it simple... you need to increase your power to overcome the current.. so if the current is at 5 MPH and you are stationary, you are creating the same wake as you would @ 5 MPH in a no current or wind sea state.

Being stationary in a current of 5MPH your boat speedo will usually read 5 MPH even though you are not moving forward. Your GPS will read 0 MPH. When you move forward through the current at 5 MPH... your boat speedo will read 10 MPH and your GPS will read 5 MPH. However, you will be creating a 10 MPH wake and the engine power will be the equivalent of 10 MPH in a no current or wind sea state.

I totally understand it... I just didn't explain it fully!

Woodsy
__________________
The only way to eliminate ignorant behavior is through education. You can't fix stupid.
Woodsy is offline   Reply With Quote
The Following User Says Thank You to Woodsy For This Useful Post:
ITD (08-13-2014)
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 07:16 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.

This page was generated in 0.13305 seconds