Go Back   Winnipesaukee Forum > Winnipesaukee Forums > Home, Cottage or Land Maintenance
Home Forums Gallery Webcams Blogs YouTube Channel Classifieds Register FAQ Members List Donate Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 03-07-2015, 08:55 AM   #1
Hawley
Junior Member
 
Join Date: Aug 2012
Posts: 15
Thanks: 0
Thanked 2 Times in 2 Posts
Default Electric Hot Water Heater

One of the very important variables is that the heater is installed in a warm area
Hawley is offline   Reply With Quote
Old 03-07-2015, 09:56 AM   #2
chocophile
Senior Member
 
chocophile's Avatar
 
Join Date: Apr 2004
Location: 19-Mile Bay
Posts: 117
Thanks: 15
Thanked 33 Times in 16 Posts
Default On-Demand Has Some Drawbacks

We have an on-demand hot water heater (natural gas) and I'm not thrilled with it.

There is a delay after the water begins to flow, and it takes a while to heat up the exchanger before the water gets hot. As a result, you have to run the water for a long time before it's hot at the faucet. If you're just washing your hands, it takes too long.

When you shut off the water, the heat exchanger quickly gives up its heat. So when you turn the faucet back on, it's cold again and you have to wait.

You end up wasting a lot of water waiting for it to get hot.

If you are in the shower when someone starts up the dishwasher or washing machine, you get widely varying pressure, so temperature variation.

Finally, I think another thread mentioned that you cannot completely drain an on-demand unit to shut it down in the winter.

I can imagine a unit that addresses these complaints, but I don't think it's on the market yet.
chocophile is offline   Reply With Quote
Old 03-07-2015, 10:33 AM   #3
BroadHopper
Senior Member
 
BroadHopper's Avatar
 
Join Date: Oct 2004
Location: Laconia NH
Posts: 5,669
Thanks: 3,285
Thanked 1,132 Times in 814 Posts
Default

Quote:
Originally Posted by chocophile View Post
We have an on-demand hot water heater (natural gas) and I'm not thrilled with it.

There is a delay after the water begins to flow, and it takes a while to heat up the exchanger before the water gets hot. As a result, you have to run the water for a long time before it's hot at the faucet. If you're just washing your hands, it takes too long.

When you shut off the water, the heat exchanger quickly gives up its heat. So when you turn the faucet back on, it's cold again and you have to wait.

You end up wasting a lot of water waiting for it to get hot.

If you are in the shower when someone starts up the dishwasher or washing machine, you get widely varying pressure, so temperature variation.

Finally, I think another thread mentioned that you cannot completely drain an on-demand unit to shut it down in the winter.

I can imagine a unit that addresses these complaints, but I don't think it's on the market yet.
Funny Its the opposite for me. It takes a minute for the hot water to reach the faucet and it is hot! Even when the dishwasher and clothes washer is on I have a great shower. I love my tank less hot water heater. Maybe it is not installed right? I have the System 2000 unit.
__________________
Someday may never be an actual day.
BroadHopper is offline   Reply With Quote
Old 03-07-2015, 02:28 PM   #4
Hawley
Junior Member
 
Join Date: Aug 2012
Posts: 15
Thanks: 0
Thanked 2 Times in 2 Posts
Default On Demand Water Heater

System 2000 by Energy Kinetics doesn't make a on demand water heater. They use a plated heat exchanger with a storage tank.
Hawley is offline   Reply With Quote
Old 03-08-2015, 09:04 AM   #5
Kamper
Senior Member
 
Kamper's Avatar
 
Join Date: Jul 2005
Location: Thornton's Ferry
Posts: 1,314
Thanks: 67
Thanked 172 Times in 128 Posts
Default

'On demands' do have the delay and waste situation described above but for low-use periods you might want to consider one of the less expensive ones offered at Sportsman's Guide.

I got the cheapest propane version, to use in a camper I have as a guest house. The more expensive ones are about $250 and should be enough for a regular household. If you are handy, you can plumb a spigot line from the hot-water circuit to the outside of your house fairly cheaply and even if you hire a plumber it shouldn't take more than 2-3 man hours.

The whole thing will be much less than the couple thousand that will be wanted for an inside installation. When the propane tank gets chilled it won't provide as much energy to the heater but you still have your boiler to switch on. It's just a question of turning a few valves when you decide which unit to use.

If this suggestion doesn't work out for you, you can still get some of your money back by selling it and you'll have a hot water outlet which will come in handy for cleaning your grill and other gear.

I mounted mine on a post a couple feet away from the trailer wall. I would suggest a similar installation but the larger ones do offer more conventional options. Mine is removed in the off-season but you may choose to leave it in place but winterized.


Good luck!
Kamper is offline   Reply With Quote
Sponsored Links
Old 03-08-2015, 12:25 PM   #6
BroadHopper
Senior Member
 
BroadHopper's Avatar
 
Join Date: Oct 2004
Location: Laconia NH
Posts: 5,669
Thanks: 3,285
Thanked 1,132 Times in 814 Posts
Default

Quote:
Originally Posted by Hawley View Post
System 2000 by Energy Kinetics doesn't make a on demand water heater. They use a plated heat exchanger with a storage tank.
I don't see a storage tank, and I was told it was tank less. Now I am really confused! It is a great system BTW. It works well with a Mitsubishi split system.
__________________
Someday may never be an actual day.
BroadHopper is offline   Reply With Quote
Old 03-15-2015, 11:44 AM   #7
BroadHopper
Senior Member
 
BroadHopper's Avatar
 
Join Date: Oct 2004
Location: Laconia NH
Posts: 5,669
Thanks: 3,285
Thanked 1,132 Times in 814 Posts
Default Energy Kinetics Sytem 2000

I didn't realize they make different models. I have the Accel CS which is a wall mounted integrated boiler. It is one of the most efficient boiler in the 2015 Energystar website. Take a look at this http://www.energykinetics.com/accel-...g-boiler.shtml
__________________
Someday may never be an actual day.
BroadHopper is offline   Reply With Quote
Old 03-20-2015, 11:53 AM   #8
TheProfessor
Senior Member
 
Join Date: Nov 2010
Posts: 1,164
Thanks: 17
Thanked 357 Times in 214 Posts
Default

I have an on demand tankless propane water heater.
Does work and has worked for 10 years.
But it does require adjusting. Water pressure and flow rates.
And there is no one who can repair these. Yes, some claim to be able. But in the end the cost of any repair would approximate the cost of an ordinary 30 gallon electric water heater.

Bottom line.
If I had to do all over again. I would purchase an ordinary run of the mill 30 gallon electric water heater. Easier to replace when wears out and less expensive.
TheProfessor is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 06:49 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.

This page was generated in 0.40480 seconds