how do I get the water out of my seat cushions?

[Rich]

If your covering is in good shape, perhaps take it to someone that specializes in repairs and have them restuff with new foam, or a foam that won't hold water.

Perhaps someone like Ship-Shape marine. They can take out the old foam, install new and restitch the seams.

This should be a lot less expensive than having a new cushion made as there is not a lot of labor involved.

If you try to wait for your current foam to dry out itself, you will probably end up with mold stained covers, then the replacement will be a lot more expensive in the long run.

Good luck, let us know what you end up doing and how it works out in the long run.

[salty dog]

I like what Rich is recommending. I really wonder if you're not able to expose the foam if it ever completely dry. I'm having my port and starboard bow cushions re-done but for a different reason, however it might be a reasonable and effective solution for you. My cushions are too soft (in my opinion) and after sitting on them for about 10 minutes, your butt is right on the hard plywood as the foam completely compresses. A local marine and auto upholsterer is re-doing them using the existing vinyl for $100 ea plus cost of new HD foam, 3" thick, 2.8 density which will hold anyone's weight. This includes new black backing and drilling corner holes. I'm pleased with the price although I'm sure it could be a DIY with someone more talented than I am.

[ApS]

Originally Posted by Rich

If your covering is in good shape, perhaps take it to someone that specializes in repairs and have them restuff with new foam, or a foam that won't hold water. Perhaps someone like Ship-Shape marine. They can take out the old foam, install new and restitch the seams. This should be a lot less expensive than having a new cushion made as there is not a lot of labor involved. If you try to wait for your current foam to dry out itself, you will probably end up with mold stained covers, then the replacement will be a lot more expensive in the long run. Good luck, let us know what you end up doing and how it works out in the long run.

If the OP really likes the foam density, cut open one side, and remove the foam so it can be fully dry by Spring. In Spring, take the cushions to a professional, and replace the cut panel with a panel made of breathable Sunbrella®.

Should your cushions be drenched again, the cushions can be squeezed out and dried in the sun. The color of the new Sunbrella® material may include a perfectly-matching shade.



.