![]() |
![]() |
|
Home | Forums | Gallery | Webcams | Blogs | YouTube Channel | Classifieds | Calendar | Register | FAQ | Donate | Members List | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
![]() |
#12 |
Senior Member
Join Date: Apr 2006
Location: Central MA-Gilford
Posts: 1,446
Thanks: 340
Thanked 119 Times in 96 Posts
|
![]()
Voltage meter got trashed when it dropped onto concrete... Arg.......
![]() Anyway, one test I didn't do up to now, was one mentioned near top of post by 'VitaBene'.... Try to spin the flywheel ! Simple.... Had to remove 6 screws holding down flywheel cover, then got a big wrench and turned flywheel nut. At first it was extremely difficult to turn the flywheel, then it spun free easy ! I turned a few more times and it did turn hard at one point in the cycle, I suspect when cylinders were going up and down. That first turn was definitely hard turn. I turned engine off, and then was able to restart again, without issues? OK, so what's going on here Forum folks, has me stumped? Thanks again for all your great comments especially to 'VitaBene' ! ![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|