Need stereo or electric work on your boat?

daveschappell · 06-15-2020, 11:54 AM

I was having some problems with my boat stereo:
(1) one speaker was out
(2) radio reception not good and
(3) sound wasn't very clear

I searched these forums and found the recommendation for Nick Wilmerding at NW Marine Industries, and I couldn't be happier (it was in the old thread about someone needing help installing a Garmin)

Anyway, he came to my home in Wolfeboro on Lake Winnipesaukee, and fixed it all -- added an amplifier, strung the antenna to improve reception and replaced the speaker. Great service and very friendly -- highly recommend.

Just figured I'd share it again, as the service was outstanding.

https://nwmarineindustries.com/
207-266-1888

TiltonBB · 06-15-2020, 08:53 PM

I have used Nick several times for everything from a complete boat rewiring and stereo installation to minor electrical repairs.

His work is excellent and his prices are fair. He is a decent guy who has a lot of high end boat experience. If I remember correctly, he used to do electric wiring and installations on new Hinkley's at the factory.

I agree with the recommendation. I know some local marine service companies have been using him for their electrical work.

dippasan · 06-16-2020, 06:09 AM

Quote:

Originally Posted by TiltonBB

I have used Nick several times for everything from a complete boat rewiring and stereo installation to minor electrical repairs.

His work is excellent and his prices are fair. He is a decent guy who has a lot of high end boat experience. If I remember correctly, he used to do electric wiring and installations on new Hinkley's at the factory.

I agree with the recommendation. I know some local marine service companies have been using him for their electrical work.

I too agree with all the comments. Top notch work and service level which is hard to find these days.

Rich · 06-16-2020, 08:12 AM

I'm not a customer but I have seen Nick's work.

He does great work (I've seen his work), seems fair priced (as reported from his customers), and knows what he is doing.

What else could you want?

jeffk · 06-16-2020, 09:13 AM

I'm also a VERY satisfied customer of Nick's. He has an attention to details that is more and more rare. He doesn't just do what you ask but keeps his eyes open for other potential problems. An example: When he installed my new stereo in my boat, he observed the power feed wire from the battery was undersized and asked if I wanted to replace it with a heavier gauge wire. I know enough about electricity to understand that undersized wires can be a problem so I told him to go ahead. He is also meticulous. Every wire is cable tied in place and kink free.

He also did trailer wiring on my truck and does other types of electrical work as well.

06-15-2020, 11:54 AM	#1
daveschappell Senior Member Join Date: May 2017 Location: Wolfeboro, NH Posts: 50 Thanks: 28 Thanked 21 Times in 12 Posts	Need stereo or electric work on your boat? I was having some problems with my boat stereo: (1) one speaker was out (2) radio reception not good and (3) sound wasn't very clear I searched these forums and found the recommendation for Nick Wilmerding at NW Marine Industries, and I couldn't be happier (it was in the old thread about someone needing help installing a Garmin) Anyway, he came to my home in Wolfeboro on Lake Winnipesaukee, and fixed it all -- added an amplifier, strung the antenna to improve reception and replaced the speaker. Great service and very friendly -- highly recommend. Just figured I'd share it again, as the service was outstanding. https://nwmarineindustries.com/ 207-266-1888

06-16-2020, 08:12 AM	#4
Rich Senior Member Join Date: Jun 2012 Location: Derry / Gilford Posts: 1,247 Thanks: 74 Thanked 346 Times in 236 Posts	I'm not a customer but I have seen Nick's work. He does great work (I've seen his work), seems fair priced (as reported from his customers), and knows what he is doing. What else could you want? __________________ Don't listen to me, obviously I don't understand what I'm talking about! Let's help each other save time and money: WinniGas.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

The Following User Says Thank You to daveschappell For This Useful Post:
ishoot308 (06-15-2020)

06-15-2020, 08:53 PM	#2
TiltonBB Senior Member Join Date: Feb 2005 Location: Gilford, NH and Florida Posts: 3,063 Thanks: 726 Thanked 2,236 Times in 956 Posts	I have used Nick several times for everything from a complete boat rewiring and stereo installation to minor electrical repairs. His work is excellent and his prices are fair. He is a decent guy who has a lot of high end boat experience. If I remember correctly, he used to do electric wiring and installations on new Hinkley's at the factory. I agree with the recommendation. I know some local marine service companies have been using him for their electrical work.

The Following User Says Thank You to TiltonBB For This Useful Post:
daveschappell (06-16-2020)

The Following User Says Thank You to Rich For This Useful Post:
daveschappell (06-16-2020)

06-16-2020, 09:13 AM	#5
jeffk Senior Member Join Date: Feb 2004 Location: Center Harbor Posts: 1,191 Thanks: 210 Thanked 460 Times in 263 Posts	I'm also a VERY satisfied customer of Nick's. He has an attention to details that is more and more rare. He doesn't just do what you ask but keeps his eyes open for other potential problems. An example: When he installed my new stereo in my boat, he observed the power feed wire from the battery was undersized and asked if I wanted to replace it with a heavier gauge wire. I know enough about electricity to understand that undersized wires can be a problem so I told him to go ahead. He is also meticulous. Every wire is cable tied in place and kink free. He also did trailer wiring on my truck and does other types of electrical work as well.

The Following User Says Thank You to jeffk For This Useful Post:
daveschappell (06-16-2020)