![]() |
![]() |
|
Home | Forums | Gallery | Webcams | Blogs | YouTube Channel | Classifieds | Register | FAQ | Donate | Members List | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Feb 2007
Location: Loudon, Tennessee, foothills of the Great Smoky Mountains
Posts: 283
Thanks: 340
Thanked 41 Times in 33 Posts
|
![]()
Last year we opened camp the last week of March. The annual pine needle raking ritual was in full force by this time. We hoped to open camp this week, but put that off because it is just too darn cold and snowy.
![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jan 2007
Location: Meredith Center / Winnisquam
Posts: 250
Thanks: 87
Thanked 34 Times in 21 Posts
|
![]()
Our only nod to the winter season is to turn off the water pump and drain the pipes. We usually do this around Veterans Day. We continue to come up almost weekly during the cold months and make do with buckets of lakewater or melted snow if the lake has frozen over.
For the last 6 years, we have been able to put the water line back in and turn on the pump by April vacation/Patriot's Day. Not this year! It looks like we are at least 1-2 weeks away from turning on the water and "opening up" for the season. I can't wait! |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jul 2004
Location: pine island of course!
Posts: 406
Thanks: 246
Thanked 246 Times in 112 Posts
|
![]()
it looks like we might be able to get over to the island soon... i was hoping for this weekend, but it looks like a bust according to the PIG webcams... the Alumacraft usually can break through the soft ice from Y-Landing to Pine, but it still looks like we might have to another week before we'll attempt it!
PIG |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Feb 2007
Location: Loudon, Tennessee, foothills of the Great Smoky Mountains
Posts: 283
Thanks: 340
Thanked 41 Times in 33 Posts
|
![]()
Opening up this weekend. Hauling a new aluminum dock up to our camp! I hope the opening will go smoothly so there will be more time to play.
![]() |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Apr 2004
Posts: 88
Thanks: 11
Thanked 4 Times in 4 Posts
|
![]()
We opened last weekend and it was brilliant and warm!! Got to do chores around the house, catch a little sun, take some walks with the new puppy and make a list of things to bring/repair for this weeekend. We did a quick rake up and removed some fallen limbs but OTW it was relaxing and uneventful, no leaks...knock on wood! We even BBQ'ed Saturday evening
![]() Do we have otters in the lake? I think I saw two swim by Sunday morning early, just after that glorious sunrise. Several Loons and a pair of Mergansers also greeted us along with our usual Reds, Chippies, myriad birds. This weekend seems likely to be very different though, but we always have fun there no matter what. It's good to come home to the Lake! |
![]() |
![]() |
Sponsored Links |
|
![]() |
#6 | |
Senior Member
Join Date: Jul 2002
Location: Meredith
Posts: 1,690
Thanks: 1,205
Thanked 677 Times in 179 Posts
|
![]() Quote:
Here's a mink we saw at the edge of the ice a couple weeks ago: ![]()
__________________
DRH |
|
![]() |
![]() |
![]() |
#7 | |
Senior Member
Join Date: May 2006
Posts: 273
Thanks: 12
Thanked 6 Times in 2 Posts
|
![]() Quote:
__________________
Island Life the way my grandparents' grandparents enjoyed it - but with a faster boat!!! |
|
![]() |
![]() |
![]() |
#8 | |
Senior Member
Join Date: Apr 2004
Posts: 524
Thanks: 47
Thanked 123 Times in 63 Posts
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Apr 2004
Location: Whortleberry Island
Posts: 81
Thanks: 130
Thanked 20 Times in 10 Posts
|
![]()
We open tomorrow. Let's hope the weather forecast improves drastically!
|
![]() |
![]() |
![]() |
#10 | |
Senior Member
Join Date: Feb 2007
Location: Loudon, Tennessee, foothills of the Great Smoky Mountains
Posts: 283
Thanks: 340
Thanked 41 Times in 33 Posts
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Jan 2007
Location: Meredith Center / Winnisquam
Posts: 250
Thanks: 87
Thanked 34 Times in 21 Posts
|
![]()
I opened our camp last weekend...couldn't wait...waded through the fractured ice to put the water line into the lake. No leaks - always an occasion to celebrate with a glass of wine. Got to fix that leak in the waders though! BBRRRRR!
Moosetracks, what type of aluminum dock did you get? This is something I have been considering for a future purchase and would love to hear what you have done. |
![]() |
![]() |
![]() |
#12 | |
Senior Member
Join Date: Apr 2004
Location: Eastern MA & Frye Island/Sebago Lake, Maine
Posts: 952
Thanks: 254
Thanked 351 Times in 158 Posts
|
![]() Quote:
BT
__________________
" Live for today because yesterday is gone and tomorrow may never come" |
|
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: Apr 2004
Location: Whortleberry Island
Posts: 81
Thanks: 130
Thanked 20 Times in 10 Posts
|
![]()
We opened last weekend with no leaks and no mice! Life is good. We have a Hewitt Roll-a-dock. My husband can put it in by himself. Pretty easy.
|
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: May 2006
Location: Texas, Lake Ray Hubbard and NH, Long Island Winnipesaukee
Posts: 2,882
Thanks: 1,037
Thanked 893 Times in 525 Posts
|
![]()
Just something I thought I would post. Lately the trend seems to be to go with aluminum docking, and especially with wheels. Unfortunatly My lake front is not roll-a-dock friendly, so I spent some time evaluating aluminum over wood dock structures. What I found was surprising, I had a lot of people tell me that there where huge wieght savings etc. and aluminum was the way to go.... What I found was that with a little planning I could keep the wieght of a wood dock down, and save a ton of money over buying Aluminum. Some tricks to the trade are to build 6' sections instead of 8' sections sure you end up with an extra section but you save the wieght.... my nieghbors 6' sections are easy to handle and work with. Also you can make the center support removable and of course the floor boards. In short if you already have the hardware for a pipe dock, don't toss it away and start new, rebuild and design with thought..... Luckily my dock still has a couple of years left, but I am already starting to think about how I will setup a new dock, hopefully with enough planning I will save money and end up with a system that is easy to install and remove......
__________________
Life is about how much time you can spend relaxing... I do it on an island that isn't really an island..... |
![]() |
![]() |
![]() |
#15 |
Senior Member
Join Date: Jan 2007
Location: Meredith Center / Winnisquam
Posts: 250
Thanks: 87
Thanked 34 Times in 21 Posts
|
![]()
I would love more info on this topic. I bought all new aluminum brackets (6)this past weekend along with 2 - 7' lengths of pipe...I consider this a substantial investment! I replaced 3 rotten deck boards and hope to get one more year out of our dock. Our dock has 2 - 10' sections, one of which is hinged to an ancient (older than me!) concrete pad. We tie a 20' pontoon boat to the dock for the season and are in a relatively sheltered area of the lake.
Last year we were able to elevate and tie off the hinged section high enough that it was out of the water. We then had to remove the 2nd section and put it up on land for the winter. The two of us did it but I can see it getting harder and harder each year. I have been considering an aluminum dock (for the weight savings) but my husband thinks that it could buckle. Pressure treated boards are extremely heavy and not that great for the environment. Has anyone built a dock with cedar framework and decking? Was it worth the extra $$$ to save on weight? I am considering all options. $$$ is very much a consideration and I only want to do this once! |
![]() |
![]() |
![]() |
#16 | |
Senior Member
Join Date: Jan 2005
Location: Florida (Sebring & Keys), Wolfeboro
Posts: 5,952
Thanks: 2,229
Thanked 782 Times in 558 Posts
|
![]() Quote:
![]() A neighbor has "edge-grain" fir sections (four-foot sections) in a wood frame that he puts in every year, and has replaced it entirely just once in fifty-five years. Another neighbor built a dock of expensive mahogany, but two seasons of high water and ice pressure has not been kind to it—and it's only two years old. To do it all again, I'd build a "composite" dock: four pilings driven close to shore outside the reach of ice out to twenty feet or so, with a lift-up aluminum dock attached to it. A pipe dock, located in your quiet area of the lake, is hard to beat for economy. I'd take LIforrelaxin's advice on the shorter sections for ease of handling.
__________________
Is it ![]() ![]() |
|
![]() |
![]() |
![]() |
#17 |
Senior Member
Join Date: Apr 2004
Posts: 5,075
Thanks: 215
Thanked 903 Times in 509 Posts
|
![]()
Contrary to what APS posted,I would not build docks totally out of PT if you need to remove them each year.We made that mistake once.They are extremly heavy and it can be backbreaking work.We also tried using PT for just the framing portion and cedar for the decking.Big weight difference.The one problem with aluminum decking is noise.We had a neighbor with alu decking and his kids would run up and down that dock endlessly and it made a very annoying racket.Some things to think about.
__________________
SIKSUKR Last edited by SIKSUKR; 05-02-2007 at 10:14 AM. |
![]() |
![]() |
![]() |
#18 | |
Senior Member
Join Date: May 2006
Location: Texas, Lake Ray Hubbard and NH, Long Island Winnipesaukee
Posts: 2,882
Thanks: 1,037
Thanked 893 Times in 525 Posts
|
![]() Quote:
Also a note on preasure treated vs. standard kiln dried lumber. While the Kiln dired lumber is lighter, you have to be aware that the kiln dried wood has more up keep to it. It should be stained every year to help fight rott. As opposed to the preasure treated, which I do nothing too, and have sections that are 20+ years old. As for enviormental impact, I wouldn't worry to much the presure treating additives are not as bad as they used to be, and as long as you use pipe legs, the frames are not really in the water that much....well the last couple of years are an excpetion....
__________________
Life is about how much time you can spend relaxing... I do it on an island that isn't really an island..... |
|
![]() |
![]() |
![]() |
#19 |
Senior Member
Join Date: Apr 2004
Location: Eastern MA & Frye Island/Sebago Lake, Maine
Posts: 952
Thanks: 254
Thanked 351 Times in 158 Posts
|
![]()
Here are some links to a couple of aluminum vendors that I researched when I did mine.
http://www.floeintl.com/docks.asp?pageName=rollIn&sm=1 http://www.alummikondock.com/ I think they both have NH dealerships. BT
__________________
" Live for today because yesterday is gone and tomorrow may never come" |
![]() |
![]() |
![]() |
#20 |
Senior Member
Join Date: Apr 2004
Posts: 5,075
Thanks: 215
Thanked 903 Times in 509 Posts
|
![]()
Mine were not removable.I can see where removable would be a much better option if using all PT.
__________________
SIKSUKR |
![]() |
![]() |
![]() |
#21 | |
Senior Member
Join Date: Feb 2007
Location: Loudon, Tennessee, foothills of the Great Smoky Mountains
Posts: 283
Thanks: 340
Thanked 41 Times in 33 Posts
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#22 | |
Senior Member
Join Date: Feb 2007
Location: Loudon, Tennessee, foothills of the Great Smoky Mountains
Posts: 283
Thanks: 340
Thanked 41 Times in 33 Posts
|
![]() Quote:
![]() ![]() |
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|