Free anchor

Cal · 08-15-2005, 10:47 AM

I've had an anchor stuck myself more than once. Did you try tying it to a rear clear and powering off in the opposite direction in which the boat was drifting at anchor. This will exert a prying force on the anchor and has always gotten mine up(with an occasional tree limb still in the fluke).
Too late in this case but just something to keep in mind if it happens again

jrc · 08-15-2005, 02:41 PM

I tried powering in pretty much every direction. I was a little nervous about pulling a cleat out. I've had the anchor stuck before, usually I can either power or giggle it out. This time I could hear and feel the shank moving but the flukes had to be wedged under something big.

ApS · 08-15-2005, 05:11 PM

What often happens is that the anchor will slide under the points of three boulders.

I recovered my neighbor's anchor last week (he had tied a float to the anchor line) by running in a big circle around the stuck anchor. The technique has always worked for me.

I also have a large galvanized ring that can be slid down the anchor line, over the chain, and down the shank to pull it out by the crown.

(Attach a line to it first).

08-15-2005, 10:47 AM	#1
Cal Senior Member Join Date: Apr 2004 Location: Pitman , NJ Posts: 627 Thanks: 40 Thanked 21 Times in 12 Posts	I've had an anchor stuck myself more than once. Did you try tying it to a rear clear and powering off in the opposite direction in which the boat was drifting at anchor. This will exert a prying force on the anchor and has always gotten mine up(with an occasional tree limb still in the fluke). Too late in this case but just something to keep in mind if it happens again __________________ Paddle faster , I think I here banjos

08-15-2005, 02:41 PM	#2
jrc Senior Member Join Date: Apr 2004 Location: NH Posts: 2,689 Thanks: 33 Thanked 439 Times in 249 Posts	I tried powering in pretty much every direction. I was a little nervous about pulling a cleat out. I've had the anchor stuck before, usually I can either power or giggle it out. This time I could hear and feel the shank moving but the flukes had to be wedged under something big.

08-15-2005, 05:11 PM	#3
ApS Senior Member Join Date: Jan 2005 Location: Florida (Sebring & Keys), Wolfeboro Posts: 5,938 Thanks: 2,205 Thanked 776 Times in 553 Posts	What often happens is that the anchor will slide under the points of three boulders. I recovered my neighbor's anchor last week (he had tied a float to the anchor line) by running in a big circle around the stuck anchor. The technique has always worked for me. I also have a large galvanized ring that can be slid down the anchor line, over the chain, and down the shank to pull it out by the crown. (Attach a line to it first).