Cheap Pontoon Flooring

[VitaBene]

Originally Posted by ishoot308

Couple things I can think of...

#1. Horse stall mats. They are cheap and tough as nails. Available at any Agway or tractor supply. Only downside is they are heavy and not sure what size they come in. Most of the ones I have seen are 4’ x 6’ x 3/4” You may have to butt a few of them together.

#2. Your best option but definitely more expensive is a garage mat. I just bought a couple for my garage at Sam’s Club for $489.00 each. They are 10’ x 24’ They also sell a 7 1/2’ x 17’ for $249.00 if that would fit your floor. https://www.samsclub.com/p/g-floor-1...=login-success

Dan

Dan, how do the garage mats hold up to jacks, etc? I have a Morton building behind my house that I use for working on and storing motorcycles, but I also will work on cars in there as well. The building is 24X30, so 3 of those mats would cover the floor nicely. It is sealed concrete now, but would like a more finished look as the walls and ceiling are finished with rough sawn and pickled pine respectively.

[ishoot308]

Originally Posted by VitaBene

Dan, how do the garage mats hold up to jacks, etc? I have a Morton building behind my house that I use for working on and storing motorcycles, but I also will work on cars in there as well. The building is 24X30, so 3 of those mats would cover the floor nicely. It is sealed concrete now, but would like a more finished look as the walls and ceiling are finished with rough sawn and pickled pine respectively.

Hi Vita;

I have not received the mats yet, still waiting for them to arrive. The mats are supposedly "floor jack certified" whatever that means! That question was also asked of the manufacturer in a Home Depot review and here is their response... "The G-Floor Diamond Tread, Coin and Small Coin patterns would all work with a floor jack. Please note that jack stands with sharp edges could cause damage to the flooring. Placing the jack stands on a solid piece of wood will keep the jack stand from cutting into the flooring."

The mats are from the same manufacturer and same material as commercial stair treads which I do have at my business. The stuff is tough as nails!! I think they would be perfect for what you want to do!

Dan

[Formula260SS]

Originally Posted by ishoot308

Hi Vita;

I have not received the mats yet, still waiting for them to arrive. The mats are supposedly "floor jack certified" whatever that means! That question was also asked of the manufacturer in a Home Depot review and here is their response... "The G-Floor Diamond Tread, Coin and Small Coin patterns would all work with a floor jack. Please note that jack stands with sharp edges could cause damage to the flooring. Placing the jack stands on a solid piece of wood will keep the jack stand from cutting into the flooring."

The mats are from the same manufacturer and same material as commercial stair treads which I do have at my business. The stuff is tough as nails!! I think they would be perfect for what you want to do!

Dan

Thanks for the reply's

I found this stuff last night and the price point is decent. I like it in cause it's the width of the deck and comes in different length's so I can lay it down in one piece.

https://www.recpro.com/8-6-diamond-p...oring-in-gray/

[ishoot308]

Originally Posted by Formula260SS

Thanks for the reply's

I found this stuff last night and the price point is decent. I like it in cause it's the width of the deck and comes in different length's so I can lay it down in one piece.

https://www.recpro.com/8-6-diamond-p...oring-in-gray/

If they have it in a gray or any other light color I would definitely get that as all that black rubber / polyvinyl stuff gets hotter than hell in the sun!

Good luck with your project!!

Dan

[Bear Guy]

Originally Posted by Formula260SS

Thanks for the reply's

I found this stuff last night and the price point is decent. I like it in cause it's the width of the deck and comes in different length's so I can lay it down in one piece.

https://www.recpro.com/8-6-diamond-p...oring-in-gray/

Same website also has a marine-grade offering. Has similar price point, same wide width, and also available in different lengths. Has benefit of being designed for marine use, and is tan or gray (to the comment about absorbing heat).
https://www.recpro.com/recpro-8-6-ex...ooring-50-mil/

[Formula260SS]

Originally Posted by Bear Guy

Same website also has a marine-grade offering. Has similar price point, same wide width, and also available in different lengths. Has benefit of being designed for marine use, and is tan or gray (to the comment about absorbing heat).
https://www.recpro.com/recpro-8-6-ex...ooring-50-mil/

I saw that material as well, Dan makes a good point about it getting hot but the other stuff looks more industrious. It's the Battle Barge - it has an image to uphold....lol

Typically we use it spring / fall and pull it out in the summer so it's not getting used on really hot days but certainly don't want the sun to destroy it either. I emailed them about the application and the reply was it's OK. Still thinking / looking - Thanks

[Cal Coon]

Originally Posted by ishoot308

Hi Vita;

I have not received the mats yet, still waiting for them to arrive. The mats are supposedly "floor jack certified" whatever that means! That question was also asked of the manufacturer in a Home Depot review and here is their response... "The G-Floor Diamond Tread, Coin and Small Coin patterns would all work with a floor jack. Please note that jack stands with sharp edges could cause damage to the flooring. Placing the jack stands on a solid piece of wood will keep the jack stand from cutting into the flooring."

The mats are from the same manufacturer and same material as commercial stair treads which I do have at my business. The stuff is tough as nails!! I think they would be perfect for what you want to do!

Dan

You can always invest in a pair of Snap On jack stands. They have "rolled" edges to prevent sinking into hot pavement, or "cutting" a rubber, or other type of flooring. That's why they are the best!! They think of everything, and practically give their stuff away for what they charge...