Excellent canvas work

Belmont Resident · 09-18-2008, 05:37 AM

I recently had a complete camper canvas package, excluding the factory top & windshield, done for my wife’s boat.
I chose Ship Shape Marine works for the job.
I had work done by Village Canvas on my boat in the past but elected not to use them because when I had problems with the stitching on my zippers coming out I called them and left 3 messages and got no reply back. There were other problems but I will not get into that.
The differences in workmanship are very noticeable.
Ship shape sews sippers in so that the top can be removed from the ribs should the need for repair come up. Mine does not have this nor was that option presented.
They also roll the fabric over so the zippers are sewed onto doubled up fabric. My tops and sides do not have this.
The work done on my outlaw although it looks good, when you compare the two is not even close to the quality of Ship Shape both in fit & finish. Also Village canvas did not sew a zipper on the rear for a future aft curtain which I told them before the job was done that I would eventually be having made.
In a nut shell I would highly recommend them to anyone looking to have quality work done on their boat.

Orion · 09-18-2008, 06:34 AM

Good info. How do prices compare? Where are they?
Thanks

fpartri497 · 09-18-2008, 07:29 AM

Quote:

Originally Posted by Belmont Resident

I recently had a complete camper canvas package, excluding the factory top & windshield, done for my wife’s boat.
I chose Ship Shape Marine works for the job.
I had work done by Village Canvas on my boat in the past but elected not to use them because when I had problems with the stitching on my zippers coming out I called them and left 3 messages and got no reply back. There were other problems but I will not get into that.
The differences in workmanship are very noticeable.
Ship shape sews sippers in so that the top can be removed from the ribs should the need for repair come up. Mine does not have this nor was that option presented.
They also roll the fabric over so the zippers are sewed onto doubled up fabric. My tops and sides do not have this.
The work done on my outlaw although it looks good, when you compare the two is not even close to the quality of Ship Shape both in fit & finish. Also Village canvas did not sew a zipper on the rear for a future aft curtain which I told them before the job was done that I would eventually be having made.
In a nut shell I would highly recommend them to anyone looking to have quality work done on their boat.

I had exactly the opposite experience with Ship Shape. I would not recommend them to anyone and I would never use them again. I had them build an entire camper top for my boat In the fall of 06 and the workmanship Is very poor.

Each panel Is way too big so they buckle and every stitched seam around the windows Leak bad. i get so much water In the boat that the bilge pump runs to drain It out. She left us high and (Not so dry) after many complaints from us.

Big thumbs down on that business folks.

Lakegeezer · 09-18-2008, 07:54 AM

Village Canvas is still great in my book. I've had two tarps made by them over the years and both were excellent. The fit is tight enough that I haven't had to run my bilge pump after any of the rains we had this summer. When I've gone back to them because a snap broke, it was fixed on the spot and N/C. I'd go back again - but don't expect the need for a while.

BroadHopper · 09-18-2008, 08:08 AM

Did a good job in repairing my bucket seat. The wood rotted out and they replace it with a marine plywood. They went the extra mile by painting the plywood to protect it from further damage.

RLW · 09-18-2008, 09:36 AM

Quote:

Originally Posted by fpartri497

I had exactly the opposite experience with Ship Shape. I would not recommend them to anyone and I would never use them again. I had them build an entire camper top for my boat In the fall of 06 and the workmanship Is very poor.
Each panel Is way too big so they buckle and every stitched seam around the windows Leak bad. I get so much water In the boat that the bilge pump runs to drain It out. She left us high and (Not so dry) after many complaints from us.
Big thumbs down on that business folks.

I was just about to write these very same words when I came upon the above QUOTE saving me some keying in time. I SECOND THE ABOVE.

fodalo · 09-18-2008, 10:25 AM

How about the Canvas Guys in Gilford across from Beans and Greens.

BroadHopper · 09-18-2008, 10:33 AM

Quote:

Originally Posted by fodalo

How about the Canvas Guys in Gilford across from Beans and Greens.

I think they are one and the same.

RLW · 09-18-2008, 10:38 AM

Quote:

Originally Posted by fodalo

How about the Canvas Guys in Gilford across from Beans and Greens.

They are good people also. I had them do some work for my son on a play pen cover for his pontoon boat and they were quick and very reasonable. They really could stand a little larger place to do there work as they do have a hard time sometimes locating where the heck they put your stuff when they finish it before you pick it up.

RLW · 09-18-2008, 01:38 PM

Quote:

Originally Posted by BroadHopper

I think they are one and the same.

Which two (2) are the same??? Canvas Guys and Village are two (2) different places as one (1) is in Gilford and the other is in Meridith.

The Big Kahuna · 09-18-2008, 03:22 PM

Quote:

Originally Posted by fodalo

How about the Canvas Guys in Gilford across from Beans and Greens.

I stopped in to see them to get a quote to extend the cover on my boat, that was in April of this year. I keep my boat at Mt. View which is half a mile down the road, I gave up on them getting back to me and ended up doing some modification myself. Then in August I got a phone call back from them asking me if I still needed a quote? I asked the guy what took so long to get back to me, he said he had gotten backed up with work.

White Rook · 09-18-2008, 07:04 PM

Quote:

Originally Posted by RLW

I was just about to write these very same words when I came upon the above QUOTE saving me some keying in time. I SECOND THE ABOVE.

Hello All,

Is 'Ship Shape' that does canvas the same company that offers mobile cleaning and complete detailing of boats at the marinas?

Belmont Resident · 09-19-2008, 05:16 AM

If anyone is serious about it I'd be willing to show both boats and allow you to see first hand the differences.
Yes they are also the mobile detailing business that does a lot of work at local marinas.
As for price, well you get what you pay for. As a local contractor I run into people all the time who look for the lowest price. I also quite often here through the grape vine they were unhappy with the quality of the work.
Bottom line, you get what you pay for with respect to quality verses price.
I’m not saying village canvas was bad. But from all I’d heard about them and comparing the work apples for apples, I feel the quality on my wife’s boat is much better than on mine. A lot of people feel that if it looks good it must be good.
The fact that I had a problem and Village Canvas did not return my calls just made me look elsewhere for future work. It wasn’t until I started comparing the work done on both boats that I came to the conclusions that I did.
And don’t get me wrong, I shop with price in mind a lot myself. After all I can buy about 3 pairs of work pants at Wal-Mart for about the same price as one pair of Carharts.

BroadHopper · 09-19-2008, 08:33 AM

Quote:

Originally Posted by RLW

Which two (2) are the same??? Canvas Guys and Village are two (2) different places as one (1) is in Gilford and the other is in Meridith.

It was the canvas Guys that repaired my seat. They did an excellent job.

SAMIAM · 09-19-2008, 09:25 AM

You missed the best of all....Tom's Tops'n Trim down by the old Martel bait shop in laconia.Many of the local marina's use him so he is kind of a secret since he is on a little back street.Expert work at very fair prices.

WeirsBeachBoater · 09-19-2008, 12:21 PM

I second SAMIAM. Tom is great.

watrskir · 09-22-2008, 07:35 AM

Didnt Tom use to have a shop by the bridge at Winnisquam or am I thinking of someone else??

SIKSUKR · 09-22-2008, 08:47 AM

Quote:

Originally Posted by watrskir

Didnt Tom use to have a shop by the bridge at Winnisquam or am I thinking of someone else??

You are correct.Tom has a very good reputation and besides that,he was a friend growing up in high school.I have not been to his new location.

watrskir · 09-22-2008, 09:43 AM

Tom did a fabulous job replacing the interior of my mastercraft with factory skins. Wasnt cheap but Ill pay for good work. Forgot he was around. Will be getting a price for next years canvas for sure.

Squam Friend · 09-22-2008, 02:32 PM

I have had many many covers made by Kimbell Designs in Ashland - though he will travel and fit covers on site wherever you are - and I have found his work to be the best all around, and timely too. Martin Kimbell, 968-2168 try him out, you won't be disappointed. (and no, I am not related to Martin nor am I in business with him, he just does great work and I wanted to share his contact info with you all...)

Webbsatwinni · 09-23-2008, 05:05 PM

We just had a full enclosure completed by Village Canvas and to me, the workmanship was above average, the price was more than fair and he was pleasant to deal with.

I called quite a few places asking for the same exact thing, a full canvas built using my Crownline Bimini top as a base, most places said they could not reuse the top, Village did. Also, when we called to start looking at what we wanted, Bev took the time to walk me through things he could add and things that I wanted and explained why somethings just would not work the way I thought they would. We asked for a lot of clear to be used as I have never had an enclosure for any boat and I was concerned with viability, Bev did a great job keeping as much clear as possible while keeping it durable.

As for a comparison, I do not have one and I guess there is always better or worse for everything. He was easy to work with, worked around my schedule and kept me informed every step of the way. I am happy with the enclosure, it kept me dry in the rain and he did way better than I could have ever done

.

Mr. Moyer · 09-23-2008, 06:44 PM

Belmont res,

your not alone here, I also had a small canvas for my bowrider done at ship Shape. they were great. They meet me so they could measure it properly, and order the canvas to match, and I didn't have to miss a boating day. This year, with the weather, that was saying something. Also, while they had it I had them remove the faded letters and wet sand and detail the back portion of the boat (faded from valet storage) They worked with me and were very reasonable over all. The piece matches and along with the detailing makes my boat look brand new. I liked them so much I will be winterizing my boat with them in a few weeks. Also, they can detail your motorcycle as well. Very friendly folks

Peachy-Keen · 09-25-2008, 07:43 AM

I would hands down recommend Kimbell Designs in Ashland. Tried to get Village Canvas to do some work this year and did not get anywhere (multiple phone messages and visits to the shop, nothing!). Martin did great work right at the dock and truelly is a craftsman! Called him while he was on vacation, by his second day back in NH I already had a new cockpit cover.

codeman671 · 09-25-2008, 08:46 AM

I recently had a cockpit and bow cover made by Converse Upholstery in Farmington, off 10 Rod Road. It was by far the best canvas job I have ever seen. Our last wakeboard boat had work done by Steve, so when we picked up this one we naturally sent it there.

White Rook · 09-25-2008, 11:10 AM

Over the last 25 years, all my fabric and upholstery work has been done by Sal Messina in Lawrence, MA. The cockpit cover I had made last season however, was done by someone referred to as 'Kim' through Irwin Marine. It was / is an excellent fit. It wasn't inexpensive but it was worth it!

jasn · 10-04-2008, 03:56 PM

Quote:

Originally Posted by White Rook

Hello All,

Is 'Ship Shape' that does canvas the same company that offers mobile cleaning and complete detailing of boats at the marinas?

Yes they are WR.

Last month Ship Shape replaced the sport cover for my old '89 Formula and it is the best canvas it's ever worn for a very good price.

While they had the boat they also did a fabulous job restoring some life back into the tired gelcoat and blue striping, also at a good value. It's the best it's looked since I've owned it, and Rick went the extra mile to accommodate the job and even fix a few other things beyond the original quote.

I give Ship Shape a high recommendation!

09-18-2008, 05:37 AM	#1
Belmont Resident Senior Member Join Date: Apr 2004 Location: Belmont NH but prefer Jackman Maine Posts: 1,857 Thanks: 491 Thanked 410 Times in 251 Posts	Excellent canvas work I recently had a complete camper canvas package, excluding the factory top & windshield, done for my wife’s boat. I chose Ship Shape Marine works for the job. I had work done by Village Canvas on my boat in the past but elected not to use them because when I had problems with the stitching on my zippers coming out I called them and left 3 messages and got no reply back. There were other problems but I will not get into that. The differences in workmanship are very noticeable. Ship shape sews sippers in so that the top can be removed from the ribs should the need for repair come up. Mine does not have this nor was that option presented. They also roll the fabric over so the zippers are sewed onto doubled up fabric. My tops and sides do not have this. The work done on my outlaw although it looks good, when you compare the two is not even close to the quality of Ship Shape both in fit & finish. Also Village canvas did not sew a zipper on the rear for a future aft curtain which I told them before the job was done that I would eventually be having made. In a nut shell I would highly recommend them to anyone looking to have quality work done on their boat.

09-18-2008, 06:34 AM	#2
Orion Senior Member Join Date: Feb 2003 Location: Cow Island Posts: 914 Thanks: 602 Thanked 193 Times in 91 Posts	Sounds good but cost? Good info. How do prices compare? Where are they? Thanks

09-18-2008, 07:54 AM	#4
Lakegeezer Senior Member Join Date: Feb 2003 Location: Moultonboro, NH Posts: 1,677 Blog Entries: 1 Thanks: 354 Thanked 639 Times in 290 Posts	Thumbs up for Village Canvas Village Canvas is still great in my book. I've had two tarps made by them over the years and both were excellent. The fit is tight enough that I haven't had to run my bilge pump after any of the rains we had this summer. When I've gone back to them because a snap broke, it was fixed on the spot and N/C. I'd go back again - but don't expect the need for a while. __________________ -lg

09-18-2008, 08:08 AM	#5
BroadHopper Senior Member Join Date: Oct 2004 Location: Laconia NH Posts: 5,570 Thanks: 3,206 Thanked 1,101 Times in 793 Posts	Village Canvas Did a good job in repairing my bucket seat. The wood rotted out and they replace it with a marine plywood. They went the extra mile by painting the plywood to protect it from further damage. __________________ Someday may never be an actual day.

09-19-2008, 05:16 AM	#13
Belmont Resident Senior Member Join Date: Apr 2004 Location: Belmont NH but prefer Jackman Maine Posts: 1,857 Thanks: 491 Thanked 410 Times in 251 Posts	compare the difference If anyone is serious about it I'd be willing to show both boats and allow you to see first hand the differences. Yes they are also the mobile detailing business that does a lot of work at local marinas. As for price, well you get what you pay for. As a local contractor I run into people all the time who look for the lowest price. I also quite often here through the grape vine they were unhappy with the quality of the work. Bottom line, you get what you pay for with respect to quality verses price. I’m not saying village canvas was bad. But from all I’d heard about them and comparing the work apples for apples, I feel the quality on my wife’s boat is much better than on mine. A lot of people feel that if it looks good it must be good. The fact that I had a problem and Village Canvas did not return my calls just made me look elsewhere for future work. It wasn’t until I started comparing the work done on both boats that I came to the conclusions that I did. And don’t get me wrong, I shop with price in mind a lot myself. After all I can buy about 3 pairs of work pants at Wal-Mart for about the same price as one pair of Carharts.

09-18-2008, 10:25 AM	#7
fodalo Member Join Date: Apr 2004 Posts: 22 Thanks: 0 Thanked 7 Times in 2 Posts	How about the Canvas Guys in Gilford across from Beans and Greens.

09-19-2008, 09:25 AM	#15
SAMIAM Senior Member Join Date: Apr 2004 Location: Moultonborough Posts: 2,892 Thanks: 334 Thanked 1,673 Times in 584 Posts	You missed the best of all....Tom's Tops'n Trim down by the old Martel bait shop in laconia.Many of the local marina's use him so he is kind of a secret since he is on a little back street.Expert work at very fair prices.

09-19-2008, 12:21 PM	#16
WeirsBeachBoater Senior Member Join Date: Apr 2004 Posts: 709 Blog Entries: 9 Thanks: 39 Thanked 148 Times in 65 Posts	I second SAMIAM. Tom is great.

09-22-2008, 07:35 AM	#17
watrskir Senior Member Join Date: Jul 2004 Posts: 51 Thanks: 39 Thanked 9 Times in 8 Posts	toms... Didnt Tom use to have a shop by the bridge at Winnisquam or am I thinking of someone else??

09-22-2008, 09:43 AM	#19
watrskir Senior Member Join Date: Jul 2004 Posts: 51 Thanks: 39 Thanked 9 Times in 8 Posts	Tom did a fabulous job replacing the interior of my mastercraft with factory skins. Wasnt cheap but Ill pay for good work. Forgot he was around. Will be getting a price for next years canvas for sure.

09-22-2008, 02:32 PM	#20
Squam Friend Junior Member Join Date: Jun 2008 Posts: 19 Thanks: 0 Thanked 0 Times in 0 Posts	I have had many many covers made by Kimbell Designs in Ashland - though he will travel and fit covers on site wherever you are - and I have found his work to be the best all around, and timely too. Martin Kimbell, 968-2168 try him out, you won't be disappointed. (and no, I am not related to Martin nor am I in business with him, he just does great work and I wanted to share his contact info with you all...)

09-23-2008, 05:05 PM	#21
Webbsatwinni Senior Member Join Date: Sep 2007 Location: Lebanon Ct and Rattlesnake Island Since 2007 Posts: 610 Thanks: 180 Thanked 137 Times in 72 Posts	We just had a full enclosure completed by Village Canvas and to me, the workmanship was above average, the price was more than fair and he was pleasant to deal with. I called quite a few places asking for the same exact thing, a full canvas built using my Crownline Bimini top as a base, most places said they could not reuse the top, Village did. Also, when we called to start looking at what we wanted, Bev took the time to walk me through things he could add and things that I wanted and explained why somethings just would not work the way I thought they would. We asked for a lot of clear to be used as I have never had an enclosure for any boat and I was concerned with viability, Bev did a great job keeping as much clear as possible while keeping it durable. As for a comparison, I do not have one and I guess there is always better or worse for everything. He was easy to work with, worked around my schedule and kept me informed every step of the way. I am happy with the enclosure, it kept me dry in the rain and he did way better than I could have ever done .

09-23-2008, 06:44 PM	#22
Mr. Moyer Member Join Date: Apr 2007 Posts: 49 Thanks: 1 Thanked 0 Times in 0 Posts	Belmont res, your not alone here, I also had a small canvas for my bowrider done at ship Shape. they were great. They meet me so they could measure it properly, and order the canvas to match, and I didn't have to miss a boating day. This year, with the weather, that was saying something. Also, while they had it I had them remove the faded letters and wet sand and detail the back portion of the boat (faded from valet storage) They worked with me and were very reasonable over all. The piece matches and along with the detailing makes my boat look brand new. I liked them so much I will be winterizing my boat with them in a few weeks. Also, they can detail your motorcycle as well. Very friendly folks

09-25-2008, 07:43 AM	#23
Peachy-Keen Junior Member Join Date: Feb 2005 Location: Acton, MA (Meredith) Posts: 12 Thanks: 3 Thanked 0 Times in 0 Posts	I would hands down recommend Kimbell Designs in Ashland. Tried to get Village Canvas to do some work this year and did not get anywhere (multiple phone messages and visits to the shop, nothing!). Martin did great work right at the dock and truelly is a craftsman! Called him while he was on vacation, by his second day back in NH I already had a new cockpit cover.

09-25-2008, 08:46 AM	#24
codeman671 Senior Member Join Date: Jan 2005 Posts: 3,486 Thanks: 221 Thanked 810 Times in 486 Posts	I recently had a cockpit and bow cover made by Converse Upholstery in Farmington, off 10 Rod Road. It was by far the best canvas job I have ever seen. Our last wakeboard boat had work done by Steve, so when we picked up this one we naturally sent it there.

09-25-2008, 11:10 AM	#25
White Rook Deceased Member Join Date: Jan 2007 Location: Salem NH Posts: 101 Thanks: 51 Thanked 7 Times in 5 Posts	Super Work! Over the last 25 years, all my fabric and upholstery work has been done by Sal Messina in Lawrence, MA. The cockpit cover I had made last season however, was done by someone referred to as 'Kim' through Irwin Marine. It was / is an excellent fit. It wasn't inexpensive but it was worth it! __________________ "Checkmate King II ... This Is White Rook .... Over"