Gasoline Prices

[fatlazyless]

With a Meredith Village Savings Bank 'Generations Card' you get a three percent discount at the Irving station directly across from the Meredith town docks.

Anyone have any info about using gasoline that contains ethanol in outboard motors. I've read that it can partially disolve the insides of fuel tanks made out of fiberglass and then clog up fuel injectors or carburetors and fuel filters. If the fuel tank is made out of aluminum or good quality plastic then it's not a problem. I use a Yamaha six gallon portable plastic tank so I hope it's not going to be effected. Also, I wonder how using a water separating fuel filter would help to protect from the effects of ethanol gas?

[jrc]

Originally Posted by fatlazyless

...
Anyone have any info about using gasoline that contains ethanol in outboard motors. I've read that it can partially disolve the insides of fuel tanks made out of fiberglass and then clog up fuel injectors or carburetors and fuel filters. If the fuel tank is made out of aluminum or good quality plastic then it's not a problem. I use a Yamaha six gallon portable plastic tank so I hope it's not going to be effected. Also, I wonder how using a water separating fuel filter would help to protect from the effects of ethanol gas?

This is an article from the Boat US Forum

http://my.boatus.com/forum/forum_pos...TID=56486&PN=1

There's a lot of information on that site and boatered.com about it. Seems like fiberglass gas tanks may be the biggest issue. There's also a lot of worry about water mixing with the ethanol and seperating it from the fuel. In addition to the obvious problem of water in the fuel, taking out the ethanol will reduce the octane. Finally, ethanol may cause trouble with old rubber fuel lines. It remains to be seen how bad these possible problems really turn out.